Free Shipping on Orders Over $200*
Menu

Electric Residential Hydronic Boiler Install

This is an example of a Residential Electric Boiler Install with 4 PEX Tubing Loops and one temperature that is set from the boiler.

You will notice that in this example there is one Taco Pump with ball valves and a HousPEX PEX Manifold with 4 loops. The floor temperature is set from the boiler, but you could use a mixing valve to do this if you need a higher temperature for other zones.

This is an example of a Residential Electric Boiler Install with a PEX Manifold and 4 Loops

Picture 1: Electro Residential Boiler with boiler trim and a 4 Port PEX Manifold

This is an example of a Residential Electric Boiler Install with a PEX Manifold and 4 Loops

Picture 2: Electro Residential Boiler with boiler trim and a 4 Port PEX Manifold

This is an example of a Residential Electric Boiler Install with a PEX Manifold and 4 Loops

Picture 3: Electro Residential Boiler with boiler trim and a 4 Port PEX Manifold

This is an example of a Residential Electric Boiler Install with a PEX Manifold and 4 Loops

Picture 4: Electro Residential Boiler with boiler trim and a 4 Port PEX Manifold

This is an example of a Residential Electric Boiler Install with a PEX Manifold and 4 Loops Finished

Picture 5: Electro Residential Boiler with boiler trim and a 4 Port PEX Manifold Finished

List of materials needed for a project like this (Click Link below to Purchase Product and see more Information)

Hydronic Heating Side (Trim)

Quantity 1 - Electric Heating Boilers

Quantity 2 - Hydronic Heating Mixing Valves (Not Used in this Application)

Quantity 0 - Ball Valves for Hydronic Heating Side

Quantity 2 - Webstone ProPal Series Ball Valve and Drain

Quantity 1 - Temperature Guages and Tees

Quantity 1 - Hydronic Heating Expansion Tank

Quantity 1 - Cast Iron Pump (Taco 0015-MSF3-IFC)

Quantity 1 - Pump Flanges with ball valves (For Secondary Loop Side and Most Likely 3/4 Inch)

Quantity 4 - Super Strut and Clamp

Qunatity 1 - Hydronic Circulator Switching Relay (For 1 Zone)

Quantity 1 - Hydronic Heating Thermostats and Floor Sensors (For 1 Zone)

Quantity 1 - Hydronic BackFlow Preventers and Combo AutoFill Valves

Quantity 1 - Hydronic Air Eliminators, Air Separators, Air Scoops and Dirt Separators

Quantity 1 - Hydronic Boiler Pressure Relief Valves and Water Heater Relief Valves

Quantity 1 - Radiant Heat PEX Manifold - 4 Port 1/2 Inch

 

Hydronic Heating Side (Distribution)

Quantity X - Hydronic Radiant Heat Pex Tubing (Depends on Systyem)

Quantity X - Hydronic Radiators and Convectors (Depends on System)

 

X = Various Amounts of Product needed - dependant on actual system