Free Shipping on Orders Over $200*
  • Myson RCV Contractor Series Panel Baseboard - 1346 btu - 7-7/8 by 24 inches - RCV21-600

    - 7-7/8 H 24 inches L - 1346 Btu - Includes EZ Wall Brackets & Internal Valve - Double Panel Single Convector - Does not include adapters

    Product ID • RCV216000000

  • $135.75
  • Quantity:
  • Free Shipping Eligible


Myson RCV Contractor Series Panel Baseboard Heater with 1346 btu and dimensions of 7-7/8 by 24 inches - CV21-600.

The Myson RCV21-600 Series Panel Radiator Baseboard replace standard baseboard heaters but with better heat output along with radiant heat output.

The Myson RCV21-600 radiator is equipped with a removable top grille and two removable closed side panels. Each radiator is supplied with E-Z fit wall mounting brackets, (there are no wall mounting lugs welded onto the back). A manual vent plug, two blind plugs and a preinstalled thermostatic valve insert (M30 x 1.5 thread with manual cap) are included with each radiator. Optional pedastal mounting stands are available.

The Myson RCV21-600 heater Panel radiators put out about 80 to 85% radiant heat and 20 to 15% convection heat. The Myson RCV21-600 radiator delivers quick, responsive, quiet and uniform heating with higher heat output of a typical hydronic baseboard per running foot.

Myson Heating Baseboard Radiators are manufactured using the latest laser technology to create a radiator heater of the highest quality construction. The Myson RCV21-600 panel radiator mounts on the wall, off the floor, making the cleaning of floors and carpeting simple. Advanced welding techniques allow the convector plates to be welded directly to the water channel, providing quiet, gentle and responsive radiator heat. This panel heater is backed by Myson’s 5 Year Warranty, including leaks, external corrosion, flaking or peeling of the epoxy/ polyester enamel powder coat finish.

In order to connect either of the Myson HV Valves or Compression adapters directly to the Contractor Series Baseboards you will need to use adapter # 102-82-53.

Myson recommends the use of a HV-A or HV-S valve with either MYSON copper compression or pex adaptors. Also, you can use 1/2 Inch Threaded Copper or Threaded Black Iron with teflon tape or sealer.  Lastly, you can use just either Myson Pex or 1/2 Copper Compression Adapters, but you wil need part # 102-82-53 to connect the adapters to all HV Series Radiators.

Please note: You can only put 2 Myson RCV Baseboards in series (Max about 17,500 Btu) if you do this - you are not required to purchase on optional Vindo Head. If you pipe the baseboards with mono-flows - then you will want a Vindo Head to control the temperature. You can always buy this later.

Return Policy | Shipping Policy

Manuals & Docs

Technical Specs

Myson RCV Contractor Series Panel Baseboard Radiator RCV21-600 Techs and Specs

  • Double Panel
    Single Convector Radiators
  • Mounting Wall Dimensions
    7 7/8 Inches Height by 24 Inches Width
  • Distance off Wall
    3 3/4 Inches
  • Heating Capacity (Maximum )
    1346 Btu
  • Color
    Epoxy polyester powder coat in white
  • Construction
    18 gauge cold-rolled sheet Steel
  • Energy Source
    Hot Water
  • Working pressures (Maximum)
    145 psi
  • Working temperature (Maximum)
    230 Degrees F
  • Connections
    1/2 inch British Thread
  • Included
    EZ Fit Wall Brackets
  • Water Content
    .40 gallons
  • Weight
    18 Pounds
  • Warranty
    5 year warranty against any manufacturing defects

Myson RCV Contractor Series Panel Baseboard Radiator RCV21-600 Benefits

  • Everything included in one pack no on-site assembly
  • Tested to over 145 psi hydrostatic pressure
  • Fits snugly to the wall, requiring only 3 3/4 Inches depth
  • Up-to-date fashionable high gloss finish

Info & Links