Myson RCV Contractor 21 Series Panel Baseboard Radiator - RCV21-2600
- 7-7/8 H 103 inches L - 5842 Btu - Includes EZ Wall Brackets & Internal Valve - Double Panel Single Convector - Does not include adapters
Product ID • RCV212600000
Myson RCV Contractor Series Panel Baseboard Heater with 5842 btu and dimensions of 7-7/8 by 103 Inches - CV21-2600.
The Myson RCV21-2600 Series Panel Radiator Baseboard replace standard baseboard heaters but with better heat output along with radiant heat output.
The Myson RCV21-2600 radiator is equipped with a removable top grille and two removable closed side panels. Each radiator is supplied with E-Z fit wall mounting brackets, (there are no wall mounting lugs welded onto the back). A manual vent plug, two blind plugs and a preinstalled thermostatic valve insert (M30 x 1.5 thread with manual cap) are included with each radiator. Optional pedastal mounting stands are available.
The Myson RCV21-2600 heater Panel radiators put out about 80 to 85% radiant heat and 20 to 15% convection heat. The Myson RCV21-2600 radiator delivers quick, responsive, quiet and uniform heating with higher heat output of a typical hydronic baseboard per running foot.
Myson Heating Baseboard Radiators are manufactured using the latest laser technology to create a radiator heater of the highest quality construction. The Myson RCV21-2600 panel radiator mounts on the wall, off the floor, making the cleaning of floors and carpeting simple. Advanced welding techniques allow the convector plates to be welded directly to the water channel, providing quiet, gentle and responsive radiator heat. This panel heater is backed by Myson’s 5 Year Warranty, including leaks, external corrosion, flaking or peeling of the epoxy/ polyester enamel powder coat finish.
In order to connect either of the Myson HV Valves or Compression adapters directly to the Contractor Series Baseboards you will need to use adapter # 102-82-53.
Myson recommends the use of a HV-A or HV-S valve with either MYSON copper compression or pex adaptors. Also, you can use 1/2 Inch Threaded Copper or Threaded Black Iron with teflon tape or sealer. Lastly, you can use just either Myson Pex or 1/2 Copper Compression Adapters, but you wil need part # 102-82-53 to connect the adapters to all HV Series Radiators.
Do to the size of these units - they may need to by truck. Once you place your order - we will let you know the exact cost to ship your order. It may be less than shown on our website or more.
Please note: You can only put 2 Myson RCV Baseboards in series (Max about 17,500 Btu) if you do this - you are not required to purchase on optional Vindo Head. If you pipe the baseboards with mono-flows - then you will want a Vindo Head to control the temperature. You can always buy this later.
Manuals & Docs
Myson RCV Contractor Series Panel Baseboard Radiator RCV21-2600 Techs and Specs
- Double Panel
- Single Convector Radiators
- Mounting Wall Dimensions
- 7 7/8 Inches Height by 103 Inches Width
- Distance off Wall
- 3 3/4 Inches
- Heating Capacity (Maximum )
- 5842 Btu
- Epoxy polyester powder coat in white
- 18 gauge cold-rolled sheet Steel
- Energy Source
- Hot Water
- Working pressures (Maximum)
- 145 psi
- Working temperature (Maximum)
- 230 Degrees F
- 1/2 inch British Thread
- EZ Fit Wall Brackets
- 78 Pounds
- Water Content
- 1.71 gallons
- 5 year warranty against any manufacturing defects
Myson RCV Contractor Series Panel Baseboard Radiator RCV21-2600 Benefits
- Everything included in one pack no on-site assembly
- Tested to over 145 psi hydrostatic pressure
- Fits snugly to the wall, requiring only 3 3/4 Inches depth
- Up-to-date fashionable high gloss finish
Info & Links