Free Shipping on Orders Over $200*
  • Myson RCV Contractor 22 Series Panel Baseboard Radiator - RCV22-2000

    - 7-7/8 H 79 inches L - 5939 Btu - Includes EZ Wall Brackets & Internal Valve - Double Panel Double Convector - Does not include adapters

    Product ID • RCV222000000

  • $266.75
  • Quantity:
  • Estimated Overland Truck Shipping Truck Shipping


Myson RCV Contractor Series Panel Baseboard Heater with 5939 btu and dimensions of 7-7/8 by 79 Inches - CV22-2000.

The Myson RCV22-2000 Series Panel Radiator Baseboard replace standard baseboard heaters but with better heat output along with radiant heat output.

The Myson RCV22-2000 radiator is equipped with a removable top grille and two removable closed side panels. Each radiator is supplied with E-Z fit wall mounting brackets, (there are no wall mounting lugs welded onto the back). A manual vent plug, two blind plugs and a preinstalled thermostatic valve insert (M30 x 1.5 thread with manual cap) are included with each radiator. Optional pedastal mounting stands are available.

The Myson RCV22-2000 heater Panel radiators put out about 80 to 85% radiant heat and 20 to 15% convection heat. The Myson RCV22-2000 radiator delivers quick, responsive, quiet and uniform heating with higher heat output of a typical hydronic baseboard per running foot.

Myson Heating Baseboard Radiators are manufactured using the latest laser technology to create a radiator heater of the highest quality construction. The Myson RCV22-2000 panel radiator mounts on the wall, off the floor, making the cleaning of floors and carpeting simple. Advanced welding techniques allow the convector plates to be welded directly to the water channel, providing quiet, gentle and responsive radiator heat. This panel heater is backed by Myson’s 5 Year Warranty, including leaks, external corrosion, flaking or peeling of the epoxy/ polyester enamel powder coat finish.

Myson recommends the use of a HV-A or HV-S valve with either

In order to connect either of the Myson HV Valves or Compression adapters directly to the Contractor Series Baseboards you will need to use adapter # 102-82-53.

Myson recommends the use of a HV-A or HV-S valve with either MYSON copper compression or pex adaptors. Also, you can use 1/2 Inch Threaded Copper or Threaded Black Iron with teflon tape or sealer.  Lastly, you can use just either Myson Pex or 1/2 Copper Compression Adapters, but you wil need part # 102-82-53 to connect the adapters to all HV Series Radiators.

copper compression or pex adaptors. You can also use either either MYSON copper compression adapters # 101-68-44 or pex adaptors # 12MANIFTGX2 for direct connection.

Do to the size of these units - they may need to by truck. Once you place your order - we will let you know the exact cost to ship your order. It may be less than shown on our website or more.

Please note: You can only put 2 Myson RCV Baseboards in series (Max about 17,500 Btu) if you do this - you are not required to purchase on optional Vindo Head. If you pipe the baseboards with mono-flows - then you will want a Vindo Head to control the temperature. You can always buy this later.

Return Policy | Shipping Policy

Manuals & Docs

Technical Specs

Myson RCV Contractor Series Panel Baseboard Radiator RCV22-2000 Techs and Specs

  • Double Panel
    Single Convector Radiators
  • Mounting Wall Dimensions
    7 7/8 Inches Height by 79 Inches Width
  • Distance off Wall
    5 1/8 Inches
  • Heating Capacity (Maximum )
    5939 Btu
  • Color
    Epoxy polyester powder coat in white
  • Construction
    18 gauge cold-rolled sheet Steel
  • Energy Source
    Hot Water
  • Working pressures (Maximum)
    145 psi
  • Working temperature (Maximum)
    230 Degrees F
  • Connections
    1/2 inch British Thread
  • Included
    EZ Fit Wall Brackets
  • Weight
    68.4 Pounds
  • Water Content
    1.31 gallons
  • Warranty
    5 year warranty against any manufacturing defects

Myson RCV Contractor Series Panel Baseboard Radiator RCV22-2000 Benefits

  • Everything included in one pack no on-site assembly
  • Tested to over 145 psi hydrostatic pressure
  • Fits snugly to the wall, requiring only 5 1/8 Inches depth
  • Up-to-date fashionable high gloss finish

Info & Links