Myson CV Contractor 22 Series Panel Baseboard Radiator - CV22-600
- 7-7/8 H 24 inches L - 1776 Btu - Includes EZ Wall Brackets & Internal Valve - Double Panel Double Convector - Does not include adapters
Product ID • CV2260000000
Myson CV22 Contractor Series Panel Baseboard with 1776 btu and dimensions of 7-7/8 by 24 inches - CV22-600.
The Myson CV22-600 Series Panel Radiator Baseboard replace standard baseboard but with better heat output along with radiant heat output with Double Panel and Double Convector for higher output than the CV 21 Series.
The Myson CV22-600 radiator is equipped with a removable top grille and two removable closed side panels. Each radiator is supplied with E-Z fit wall mounting brackets, (there are no wall mounting lugs welded onto the back). A manual vent plug, two blind plugs and a preinstalled thermostatic valve insert (M30 x 1.5 thread with manual cap) are included with each radiator. Optional pedastal mounting stands are available.
The Myson CV22-600 heater Panel radiators put out about 80 to 85% radiant heat and 20 to 15% convection heat. The Myson CV22-600 radiator delivers quick, responsive, quiet and uniform heating with higher heat output of a typical hydronic baseboard per running foot.
Myson Heating Baseboard Radiators are manufactured using the latest laser technology to create a radiator heater of the highest quality construction. The Myson CV22-600 panel radiator mounts on the wall, off the floor, making the cleaning of floors and carpeting simple. Advanced welding techniques allow the convector plates to be welded directly to the water channel, providing quiet, gentle and responsive radiator heat. This panel heater is backed by Myson’s 5 Year Warranty, including leaks, external corrosion, flaking or peeling of the epoxy/ polyester enamel powder coat finish.
In order to connect either of the Myson HV Valves or Compression adapters directly to the Contractor Series Baseboards you will need to use adapter # 102-82-53.
Myson recommends the use of a HV-A or HV-S valve with either MYSON copper compression or pex adaptors. Also, you can use 1/2 Inch Threaded Copper or Threaded Black Iron with teflon tape or sealer. Lastly, you can use just either Myson Pex or 1/2 Copper Compression Adapters, but you wil need part # 102-82-53 to connect the adapters to all HV Series Radiators.
Please note: You can only put 2 Myson CV Baseboards in series (Max about 17,500 Btu) if you do this - you are not required to purchase on optional Vindo Head. If you pipe the baseboards with mono-flows - then you will want a Vindo Head to control the temperature. You can always buy this later.
Manuals & Docs
Myson CV Contractor Series Panel Baseboard Radiator CV22-600 Techs and Specs
- Double Panel
- Single Convector Radiators
- Mounting Wall Dimensions
- 7 7/8 Inches Height by 24 Inches Width
- Distance off Wall
- 5 Inches
- Heating Capacity (Maximum )
- 1776 Btu
- Epoxy polyester powder coat in white
- 18 gauge cold-rolled sheet Steel
- Energy Source
- Hot Water
- Working pressures (Maximum)
- 145 psi
- Working temperature (Maximum)
- 230 Degrees F
- 1/2 inch British Thread
- EZ Fit Wall Brackets
- Water Content
- .40 gallons
- 20.5 Pounds
- 5 year warranty against any manufacturing defects
Myson CV Contractor Series Panel Baseboard Radiator CV22-600 Benefits
- Everything included in one pack no on-site assembly
- Double Panel and Double Convector
- Tested to over 145 psi hydrostatic pressure
- Fits snugly to the wall, requiring only 3 3/4 Inches depth
- Up-to-date fashionable high gloss finish
Info & Links