JJM Alkaline Technologies - NBT-23 PH Condensating Neutralizer Tank - NBT-23

JJM Alkaline Technologies  - NBT-23 CLEAR PH Neutralizer Tank maximum  300,000 Boiler Btu - 2.4 GPH - Clear Tank. Ratings replace the JM-2, JM-2C, JM-3, and JM-3C.  JJM Alkaline Technologies was formely know as JJM Boiler Works

The pH measurement of a fluid is an indicator of the acidity or alkalinity. Neutral fluids have pH of 7.0. Acid fluids have pH below 7. And alkaline fluids have pH above 7 (up to 14). The pH can be easily measured using litmus paper.

Condensate pH from condensing boilers and water heaters and furnaces is acidic. The condensate pH needs to be increased (made less acidic) to prevent possible damage to cast iron soil pipe, ABS pipe, septic tanks, plants, wastewater treatment plants and other materials handling waste water.

JM-Series Boiler Condensate Neutralizer Kits and Tubes increase pH and reduce acidity. Each increase of 1.0 in pH is a 10-times decrease in acidity. The pH of condensate is increased by approximately 1.0 to 3.0 after passing through NB neutralizing tanks. (This is a reduction in acid concentration of from 10 to 1000 times.)

Recharge Tanks regularly. Tank should be recharged when pH level moves below 6. The pH should be checked regularly (at least twice during the first year of operation) to determine the required recharging schedule.

This may require recharging as often as twice per year for high-usage systems, such as boiler systems equipped with indirect water heaters.  Boiler/furnace applications for space heating only (no DHW) may require recharging only once per year.

Return Policy | Shipping Policy

PDF Datasheet

PDF Specs / Techs