Honeywell Single-Function Aquastat Control - L4006H1004

Honeywell Aquastat Control L4006H1004 Techs and Specs

• Totally enclosed Micro Switch snap-acting switches operates on temperature rise to setpoint
• Visible control point scale & external adjustment screw permit easy setting
• Vertical or horizontal insertion of the sensing element
• Well immersion of the sensing element
• Temperature Ratings (operating range) 100 to 240 Degrees F
• Electric Ratings (full load) 5.1 amps at 240Vac, 8.0 amps at 120Vac
• Electric Ratings (locked rotor) 30.6 amps at 240Vac, 48.0 amps at 120Vac
• Spud Size: 1/2 Inches
• Bulb Size: 3/8 Inches X 2 7/8 Inches copper
• Differential: manual reset
• Insulation depth: 1 1/2 Inches
• Maximum pressure rating Capillary Bulb (direct immersion) = 200psi (1379kpa)
• Immersion Well = 255psi (1758kpa)
• Strap-on mounting on well mount
• Single-Function
• High limit, manual reset application
• Case dimensions 5 5/8 Inches high X 2 Inches wide X 2 1/8 Inches deep
• Includes heat-conductive compound and bracket for strap-on mounting
• Stop factory set at 240 Degrees F
• Approvals = Underwriters Laboratories, Inc.: UL component recognized - File No. MP466, Vol. 6, Sec. 1, Guide No. MBPR2
• Approvals = Canadian Standards Association: CSA certified, File No. LR95329-1
• Approvals = American Gas Association IAS, AGA Certified