-
Caleffi DISCALDIRT Dirt and Air Separator - NA546050TM
- 2 inch Threaded Connection - With Magnet - Steel Body - ASME Registered
Product ID • NA546050TM00
Overview
Caleffi DISCALDIRT Air and Dirt Separator with Steel Body with Magnetic Ring and 2 Inch Threaded Connection - NA546050TM. This product is ASME Registered.
Caleffi Air and dirt separators are used to continuously remove the air and debris contained in the hydronic circuits of heating and cooling systems. The air discharge of these devices is very high. They are capable of automatically removing all of the air present in the system down to the microbubble level.
The Caleffi DISCALDIRT air and dirt separator with added magnetic ring (brass) or probe (steel) removes both ferrous and non-ferrous impurities continuously, featuring powerful removable magnets that remove up to 100% of the ferrous impurities, including magnetite, that can form in a hydronic system. The Caleffi DISCALDIRT has 2 1/2 times the ferrous impurities removal performance of a standard air and dirt separator.
The impurities collect at the bottom of the device and can be flushed through the integal drain shut-off valve. The circulation of fully de-aerated and cleaned water enables the equipment to operate under optimum conditions, free from noise, corrosion, or mechanical damage.
Manuals & Docs
Technical Specs
Caleffi DISCALDIRT Dirt and Air Separator - NA546050TM Techs and Specs
- Size
- 2 Inch
- Connection Type
- Threaded
- Magnet
- Yes
- Air separation efficiency
- 100% removal to microbubble level
- Particle Separation Capacity
- to 5 µm
- Approvals
- ASME and CRN Registered
- Drain Shutoff
- 1 Inch
- Maximum Working Pressure
- 150 PSI
- Temperature Range
- 32 to 250 Degrees F
- Suitable fluids
- Water or Glycol Solution
- Fluid Capacity
- 3.6 Gallons
- Maximum Glycol
- 50%
- Weight
- 21 Pounds
Info & Links