Free Shipping on Orders Over $200*
Menu
  • Toyotomi ToyoStove Laser Direct Vent Kerosene Heater LASER 730

    - 40000 Btu - Oil - Kerosone - Diesel - Direct Vent - White Cover - Replaces the Laser 73

    Product ID • LASER7300000

  • $2,099.00
  • Quantity:
  • Estimated Overland Truck Shipping Truck Shipping

Overview

Toyotomi ToyoStove Laser Direct Vent Kerosene Heater - 40,000 BTU - LASER 730

With the Toyostove LASER 730 with 40,000 Btu's - you get much more heat for the money than with other conventional oil-fired heating systems as they are much less expensive to purchase, install and operate. The cost to operate a Toyotomi LASER 730 vented heating system is so economical that owners enjoy annual savings of up to 50% over conventional heating systems. A Toyotomi heater can pay for itself in just a few short years. Most conventional oil-fired heating systems only run at peak efficiency 20% of the time. That’s because they first have to reach the desired temperature, then they have to cool down, then continually repeat this same process—like stop-and-go heavy city traffic driving. Toyotomi’s LASER 730 special stainless steel heat exchangers carry the highest efficiency code and run at peak efficiency 100% of the time—like smooth, steady highway driving.

Toyotomi heaters don’t lose heat through ducts, pipes and registers like conventional heating systems do. Remember, it’s not necessarily how much fuel costs; it’s how much fuel you use. (By the way, did you know that oil generates one-third more heat (BTU output) than natural gas or propane?) Also, conventional heating systems consume indoor heated air and exhaust this out the chimney, which causes a vacuum that is filled by attracting outdoor cold air to infiltrate into the house. Toyotomi direct vent heating systems use outdoor air for combustion by utilizing their unique "pipe-within-a-pipe" forced-flue venting technology warming the incoming outdoor combustion air by the warm outgoing exhausted air, and they are modulating, meaning they maintain the desired temperature by automatically changing burning settings between high, medium and low.

The Toyostove LASER 730 has replaced the Laser 73.

Due to Toyotomi factory regulations, we are not permitted to ship Toyotomi products to the following states: AK, WA, CA, OR, ID, MT, NV, AZ, UT, CO, NM, HI, WY.

 

Return Policy | Shipping Policy

Manuals & Docs

Technical Specs

Toyotomi ToyoStove Laser Direct Vent Kerosene Heater LASER 730 Techs and Specs

  • Fuel Type
    ASTM D3699 K1 KEROSENE
  • Fuel Type
    ASTM D396 NO.1 LOW SULFUR FUEL OIL
  • Fuel Type
    ASTM D975 ULTRA LOW SULFUR HEATING OIL/ DIESEL
  • Cabinet Color
    White
  • Heating Efficiency
    87%
  • Heating Rating High
    40,000 Btu
  • Heating Rating Med
    27,000 Btu
  • Heating Rating Low
    15,000 Btu
  • Fuel Consumption High
    .301 gallons per hour
  • Fuel Consumption Med
    .203 gallons per hour
  • Fuel Consumption Low
    .113 gallons per hour
  • Size Inches
    30 width x 27 1/2 height x 16 3/4 Depth
  • Flue Included
    Yes - 4 to 9 inch thick wall
  • Max Elevation
    3,000 Feet
  • Max Length of Vent Pipe
    10 feet with 3 bends or less
  • Vent Pipe Hole Size
    3 Inches Diameter
  • Electrical Rating
    120 Volts
  • Electrical Usage Burning
    66 watts
  • Electrical Usage Preheat
    275 watts
  • Tank
    Exterior
  • Weight
    88 Pounds

Toyotomi ToyoStove Laser Direct Vent Kerosene Heater LASER 730 Features

  • Sealed, direct-vented system means no drafts, no chimney, no special duct work, or special construction
  • Compact Size
  • Contemporary Design
  • Power Failure Recovery System
  • 24 Hours a Day Automatic
  • 4 Cycle Burner Mode
  • Shut-Off Safety System
  • Set Back Thermostat
  • 24 Hours AM/PM Timer
  • Cool Top Cabinet
  • Display Room Temperature, Set Temperature and Error Code
  • Automatic Ignitor Cleaning System
  • Only 3 inch Hole in Wall Needed for Flue Pipe
  • Whisper Quiet Operation
  • Safe - cETL home and mobile home listed
  • Easy to install and operate

Info & Links