Qmark GFR Electric Fan Wall Space Heater - GFR2004

Qmark GFR Series electric space heaters are suitable for use in almost any room. Qmark GFR Electric Wall Heaters are efficient and do not take up any floor space as they are installed in the wall and use a wishper quiet fan to move air around the room. The GFR 2004 does not come with a built-in thermostat - so you can use a wall thermostat or optional unit-mount thermostat.

The difference between the QFG and GFR is that the GFR has Heavy gauge steel fins are brazed to low watt density steel sheathed tubular heating elements in a uniform grid pattern. The grid covers the entire discharge area, resulting in uniform heating of all discharge air, lower operating temperature and prolonged element life.

Use single wall heaters in smaller rooms such as bedrooms and bathrooms. Use multiple space heaters (controlled by a single thermostat) in larger rooms such as living rooms and family rooms. Wattage should be determined through heat loss calculations.

CLIP-N-FIT® FEATURE
Patented Clip-N-Fit® feature (US Patented No. 6,172,343) allows the installer to change the wattage of the heater to a lower output without moving jumper wire. Each GFR electric wall heater is factory wired for its maximum wattage. To change wattage, clip out either jumper 1 or 2 as shown in the installation manual for desired wattage. This patented Clip-N-Fit® feature also prevents the operator to change wattage after installation to a higher wattage.

Return Policy | Shipping Policy

PDF Manual

PDF Brochure