Qmark FDI Electric Floor Heater Drop-in Electrical Heater - FDI1504
- 208/240 Volt - 750W/2,560 Btu - 1500W/5,120 Btu
Product ID • FDI150400023
Qmark FDI Electric Floor Heater Drop-in Electrical Heater - 208/240 Volts and 750W/2,560 Btu's to 1500W/5,120 Btu's - FDI1504.
The Qmark FDI 1504 Drop-In Electric Floor Heater works well in large window areas, entryways, hallways or open stair wells yet is quiet enough for living rooms, dining rooms and even bedrooms. Electric Floor Heat works well for hard to heat areas with limited wall space. Qmark Electric Floor Heaters come in 120 volts ot 240 volts.
The electric unit heater FDI 1504 can be mounted between floor joists in either direction (parallel or perpendicular) for quick, simple installation. Heavy-gauge steel housing can take almost any type of abuse.
Please Note: Do not install this Electric Unit Heater / Electric Floor Heaters in a bathroom or other area where water may enter heater unit. Do not locate where air flow may be obstructed (under drapes, behind doors, etc.). Keep short sides at least 3 feet from side walls and long side 3 inches minimum from side walls. Do not install Qmark Electric Floor Heaters in ceiling or wall.
Manuals & Docs
Marley Qmark Drop In Floor Electric Space Heater FDI1504 Techs and Specs
- Qmark Electric Floor Heater FDI 1504 208V/240V
- Sandalwood baked enamel grille finish
- Rough opening length
- 14-5/8 inches
- Rough opening width
- 7-1/4 inches
- Rough opening depth
- 6-5/8 inches
- Grill Length
- 15 3/4 inches
- Grill Width
- 8 3/4 inches
- Hard Wired
- Thermostats Available
- Single-pole or Double- pole
- U.L. Listed
- Thermal Overheat Protector
- disconnects power in the event of overheating due to accidental blockage
Info & Links