Marley Qmark GFR Fan Electric Wall Heaters
Please Note: Due to International Supply issues caused by Covid-19, GFR Series heaters are in limited supply this heating season.
The Qmark GFR Series electric space heaters are suitable for use in almost any room. The difference between the QFG and GFR is that the GRS has Heavy gauge steel fins are brazed to low watt density steel sheathed tubular heating elements in a uniform grid pattern. The grid covers the entire discharge area, resulting in uniform heating of all discharge air, lower operating temperature and prolonged element life. Marley Qmark GFR Electric Wall Heaters are efficient and do not take up any floor space as they are installed in the wall and use a wishper quiet fan to move air around the room. Use single wall heaters in smaller rooms such as bedrooms and bathrooms. Use multiple space heaters (controlled by a single thermostat) in larger rooms such as living rooms and family rooms. Wattage should be determined through heat loss calculations and come in 120-volt or 220-volt models.
The Qmark GFR CLIP-N-FIT FEATURE allows the installer to change the wattage of the heater to a lower output without moving jumper wire. Each QFG electric wall heater is factory wired for its maximum wattage. To change wattage, clip out either jumper 1 or 2 as shown in the installation manual for desired wattage. This patented Clip-N-Fit® feature also prevents the operator to change wattage after installation to a higher wattage.