Fantech Bathroom Fans & Kitchen Fans Wall Controls
|
|
Fantech RTS2 - 15-minute timer with LED Light
|
|
15-minute timer with LED light for use with Fantech Heat Recovery and Energy Recovery Ventilators.
- Works as an override switch to turn HRV or ERV on high speed for 15 minutes
- Up to five timers can be used
- Install in bathrooms, kitchen or laundry – where ever easy-access wall control is needed
|
|
Fantech RTS3 - Intermittent Timer LED Lights
|
|
Intermittent Timer with LED lights for use with Fantech Heat Recovery and Energy Recovery Ventilators.
The ideal control for those areas of the home where excess moisture, steam and odors are created.
- Press the button once to energize your HRV/ERV system to high speed for 20 Minutes (Green)
- Press the button twice and the unit will run for 40 Minutes at high speed (Yellow)
- Press the button three times and the unit kicks to high speed for 60 minutes (Red)
- When time expires the unit will return to its original setting
|
|
|
Fantech MDEH1 - Dehumidistat Bath and Kitchen Control
|
|
Ideal for use in energy efficient houses where indoor humidity (during the heating season)
is higher than outdoor levels. High humidity is a major cause of structure damage and IAQ problems
such as mold and mildew.
- The MDEH1 is a rotary dial control without lights
- Just turn dial to set desired humidity level
- Multiple units can be used
- Install in bathrooms, kitchen, laundry
- Adjusts from 30-80% RH
|
|
|
Fantech Electronic push button Timer - FD 60EM
|
|
Electronic push button timer. Select from 10, 20, 30 and 60 minute timed operation of fan.
Includes Decora style white switch plate and screws. Fits standard single gang box. Ideal
for multiple switching locations. Switch suitable for 115 volt supply. 20 amp rating.
|
|
|
Fantech Fan/Light delay timer switch - FLD 60
|
|
Fan/Light delay timer switch. Allows continous operation of the fan for up to 1 hour after light switch
is turned off. Switch suitable for 115 volt supply. 5 amp rating. Brushed aluminum switch plate and screws
included. Suitable for single switching location.
|
|
|
Fantech Ventech Fan Control Main Control with 20 Minute Boost - VT 20M
|
|
The ultimate programmable 20 minute boost timer. Features easy-set slide adjustment for
fan speed and run-time per hour. Controls are hidden under cover plate. Use with up to
three VT20As (Auxiliary Controls) to allow 20 minute high speed boost in up to four
locations.
Fantech VT 20M Specifications:
- 3 wires
- Max Load 2.5amp
- Fits in single or multiple gang boxes
- Use up to 3 auxiliary units with one main unit
- Allows low speed ventilation with 20 minute boost
|
|
|
Fantech Ventech Fan Control Auxilary Control for Multiple Bathrooms - VT 20A
|
|
Low voltage wire connects Auxiliary Control to Main Control for 20 minute high speed
boost in secondary location.
|
|
|
Fantech Wall Control - 115 Volt Dehumidistat - FH20
|
|
Fantech Wall mounted dehumidistat. Adjustable between 20% and 80% relative humidity.
Switch suitable for up to 115 volt supply and a max of 7.5 amps.
|
|
|
Fantech Fan Delay Timer up to 60 Minute Delay 115V - FLD60
|
|
|
Fan/Light delay timer switch. Allows continous operation of the fan for up to 1 hour after light
switch is turned off. Switch suitable for 115 volt supply. 5 amp rating. Brushed aluminum switch
plate and screws included. Suitable for single switching location
|
Fantech Bath Fans Wall Controls PDF Manuals and Brochures - Click Here
|
