Takagi T-H2-IN Gas Water Heater
|
The Takagi T-H2-IN is the 2nd Generation High Efficiency Tankless unit with an
average efficiency of 90%. Where water ground water is 55 ° F and with the output set
at 120 °F, the Takagi T-H2 will provide 6.5 gallons per minute. The T-H2 can provide
up to three showers worth of water simultaneously.
The Takagi T-H2 can be vented with PVC, providing zero clearance for DV installations with
either Horizontal or Vertical Installations.
This state-of-the-art tankless water heater uses not one, but two heat exchangers
to maximize the unit’s energy efficiency, resulting in the higher-than-average
efficiency. The primary heat exchanger is made of "Heat Resistant Alloy"
HRS35 Copper, Takagi has also added a "High Corrosion Resistant Stainless Steel"
#316L secondary heat exchanger to recover waste heat from the vent stack before
it leaves the unit to preheat the in coming ground water.
This second heat exchanger and the resulting condensation that forms from the high
efficiency operation, classify it as a "Condensing" Water Heater.
Easy-Link 4 units together you can produce up to 36 GPM (Max.) as a result, the unit
will meet the needs of large homes, as well as light commercial and industrial
applications. Able to deliver water up to 185ºF, the T-H2 is appropriate for
sanitary applications needing 180ºF water to meet code requirements.
In addition to the added durability, the T-H2-IN allows a max flow rate to 9.0 GPM. The Takagi
Gas Tankless Water Heater T-H2-IN is Energy Star Certified.
The four preset temperatures on the unit are: 100°F, 105°F, 110°F, 115°F, 120°F, 125°F, 135°F, 140°F, 145°F, 150°F, 155°F, 160°F, 165°F, 170°F, 175°F and 185°F.
To achieve any temperatures other than those presets, you will require the TK-RE30 temperature
controller.
|
