|
|
Qmark QFG Fan Electric Wall Heater QFG 2024I2M Buy Page
Qmark Marley 220 Volt without Back Box or Thermostat Electric Space Heaters
|
QMark QFG 2024I2M / QFG2024I2M Electric Wall Heater
|
This Qmark QFG 2024I2M electric space heater comes with the heater and grill and is suitable for
in-the-field replacements. Like all of our Qmark QFG Electric Wall Heaters, it is efficient and do
not take up any floor space as they are installed in the wall and use a wishper quiet fan to move
air around the room. Use single wall heaters in smaller rooms such as bedrooms and bathrooms. Use
multiple space heaters (controlled by a single thermostat) in larger rooms such as living rooms and
family rooms. Wattage should be determined through heat loss calculations
|
- 220/240 Volts
- Does Not Include the Back Box
- Does Not Include a Built-in Thermostat
- 4 Wattage Setting
- 500 Watts - 2.1 Amps
- 1000 Watts - 4.2 Amps
- 1500 Watts - 6.3 Amps
- 2000 Watts - 8.3 Amps
- Dual Protection: Thermal cutout with indicator light and one time thermal fuse
- Tangential blower for whisper quiet operation
- White baked enamel finish
- Hard wired
- Open coil element assures quick heat and low maintenance
- Three piece construction for ease of installation
- Permanently lubricated, dust protected bearings
- Wall Can Size: width 14-3/8" x height 6-5/8" x 4 3/8" depth
- Grill Size: width 16-7/8" x height 7-3/4" x depth 3/4"
CLIP-N-FIT® FEATURE
Patented Clip-N-Fit® feature (US Patented No.
6,172,343) allows the installer to change the wattage of the heater to a lower
output without moving jumper wire. Each QFG electric wall heater is factory wired for its maximum
wattage. To change wattage, clip out either jumper 1 or 2 as shown in the
installation manual for desired wattage. This patented Clip-N-Fit® feature
also prevents the operator to change wattage after installation to a higher wattage.
What Size QFG2024I2M Electric Space Heater do you need? (Click Here)
|
|