|
|
Qmark QFG Fan Electric Wall Heater QFG1512T2M Buy Page
Qmark Marley 120 Volt Electric Room and Electric Space Heaters with Thermostat
Sale!
|
QMark Marley QFG 1512T2M / QFG1512T2M Electric Wall Heater
|
Qmark QFG1512T2M electric space heater is suitable for use in almost any room. Qmark QFG
Electric Wall Heaters are efficient and do not take up any floor space as they are installed
in the wall and use a wishper quiet fan to move air around the room.
Use single wall heaters in smaller rooms such as bedrooms and bathrooms. Use multiple
space heaters (controlled by a single thermostat) in larger rooms such as living rooms
and family rooms. Wattage should be determined through heat loss calculations.
|
- 120 Volts
- 4 Wattage Setting
- 275 Watts - 3.1 Amps
- 750 Watts - 6.3 Amps
- 1125 Watts - 9.14 Amps
- 1500 Watts - 12.5 Amps
- Dual Protection: Thermal cutout with indicator light and one time thermal fuse
- Tangential blower for whisper quiet operation
- Open coil element assures quick heat and low maintenance
- White baked enamel finish
- Hard wired
- Open coil element assures quick heat and low maintenance
- Three piece construction for ease of installation
- Permanently lubricated, dust protected bearings
- Wall Can Size: width 14-3/8" x height 6-5/8" x 4 3/8" depth
- Grill Size: width 16-7/8" x height 7-3/4" x depth 3/4"
- Built-In Thermostat
CLIP-N-FIT® FEATURE
Patented Clip-N-Fit® feature (US Patented No.
6,172,343) allows the installer to change the wattage of the heater to a lower
output without moving jumper wire. Each QFG electric wall heater is factory wired for its maximum
wattage. To change wattage, clip out either jumper 1 or 2 as shown in the
installation manual for desired wattage. This patented Clip-N-Fit® feature
also prevents the operator to change wattage after installation to a higher wattage.
What Size QFG1512T2M Electric Space Heater do you need? (Click Here)
|
|