|
|
Qmark GFR Fan Electric Wall Heater GFR 2400T2 Buy Page
Qmark Marley 240 Volt Electric Room and Electric Space Heaters
|
QMark Marley GFR 2400T2 / GFR2400T2 Electric Wall Heater
|
Qmark GFR Series electric space heaters are suitable for use in almost any room. Qmark GFR
Electric Wall Heaters are efficient and do not take up any floor space as they are installed
in the wall and use a wishper quiet fan to move air around the room. The GFR 2400T2 comes
with a built-in thermostat.
The difference between the QFG and GFR is that the GFR has Heavy gauge steel fins are brazed to low watt
density steel sheathed tubular heating elements in a uniform grid pattern. The grid covers the entire
discharge area, resulting in uniform heating of all discharge air, lower operating temperature and prolonged
element life.
Use single wall heaters in smaller rooms such as bedrooms and bathrooms. Use multiple
space heaters (controlled by a single thermostat) in larger rooms such as living rooms
and family rooms. Wattage should be determined through heat loss calculations.
|
- 240 Volts
- 4 Wattage Setting
- 500 Watts
- 100 Watts
- 1500 Watts
- 2000 Watts
- Dual Protection: Thermal cutout with indicator light and one time thermal fuse
- Tangential blower for whisper quiet operation
- Low watt density steel sheathed tubular heating elements
- Fan - 45 CFM
- White baked enamel finish
- Hard wired
- Open coil element assures quick heat and low maintenance
- Three piece construction for ease of installation
- Permanently lubricated, dust protected bearings
- Wall Can Size: width 14-3/8" x height 6-5/8" x 4 3/8" depth
- Grill Size: width 16-7/8" x height 7-3/4" x depth 3/4"
- Built-In Unit-Mounted Thermostat/li>
CLIP-N-FIT® FEATURE
Patented Clip-N-Fit® feature (US Patented No.
6,172,343) allows the installer to change the wattage of the heater to a lower
output without moving jumper wire. Each GFR electric wall heater is factory wired for its maximum
wattage. To change wattage, clip out either jumper 1 or 2 as shown in the
installation manual for desired wattage. This patented Clip-N-Fit® feature
also prevents the operator to change wattage after installation to a higher wattage.
What Size GFR 2400T2 Electric Space Heater do you need? (Click Here)
|
|