|
|
Qmark FDI Floor Drop-in Electric Floor Heater FDI1504 - 240 Volts Buy Page
Qmark 240-Volt FDI Electric Floor Heater for use in hard to heat areas
Sale!
|
Qmark Drop In Floor Electric Space Heater FDI1504
|
The Qmark Drop-In Electric Floor Heater FDI1504 works well in large window areas, entryways,
hallways or open stair wells yet is quiet enough for living rooms, dining rooms and
even bedrooms. Electric Floor Heat works well for hard to heat areas with limited wall space. Qmark
The FDI1504 Electric Floor Heater is 240 volts.
This Qmark Electric Unit Heater FDI1504 can be mounted between floor joists
in either direction (parallel or perpendicular) for quick, simple installation.
Heavy-gauge steel housing can take almost any type of abuse.
|
- Qmark Electric Floor Heater - FDI1504 - 208/240V - 562/1125 or 750/1500W - 1920/5120 BTUh
- Sandalwood baked enamel grille finish
- Rough opening: length 14-5/8" x width 7-1/4" x depth 6-5/8"
- Grill Size: length 15-3/4" x width 8-3/4"
- Hard Wired
- Thermal Overheat Protector disconnects power in the event of overheating due to accidental blockage
- Single-pole or Double-pole Thermostats Available
- U.L. Listed - Canada and USA
Please Note:
Do not install this Electric Unit Heater / Electric Floor Heaters in a bathroom or other area where water may enter
heater unit. Do not locate where air flow may be obstructed (under drapes, behind doors, etc.).
Keep short sides at least 3 feet from side walls and long side 3 inches minimum from side walls.
Do not install Qmark Electric Floor Heaters in ceiling or wall.
What Size Drop-in Electric Floor Heater do you need? (Click Here)
|
|