|
A Mechanical Modular System designed specifically for the Ti-150
Trinity Boiler.
The Precision Hydronics Trinapak starter modules are available in both
pumping and zone configurations and can be assembled in a matter of minutes.
Does NOT include boiler.
|
Trinapak Boiler System Starter Module includes:
- 1 5/8" welded stand
- Amtrol 30 or Watts equivalent expansion tank
- Taco 3350 pressure reducing valve
- Fill-line assembly
- 1 1/4" primary/secondary loop assembly
- 1 1/4" primary loop isolation ball valves
- Purge valve on primary loop supply
- Temperature and pressure gauge on primary loop supply
- Wye strainer on primary loop return
- 1 1/4" spring check on primary loop supply
- Bell & Gosset 1 1/4" air eliminator #112116
- Taps for Indirect Water Kit (see below)
- Secondary components ordered separately
|
Secondary components with up to 5
ZONE PUMPS include:
- Taco 008-F6 or Grundfos UPS 15-58FC pumps
- Isolation flanges with spring check valves
- 1" main supply and return
- End plugs with purge valves
- 3/4" pipe branches
- Temperature gauge on each branch
- Isolation ball valve on each branch
- PHP "Slip-Fit" or sweat connections
Zone pump options:
|
Seconday components with up to 5
ZONE VALVES include:
- Taco 0010-F3 or Grundfos UPS 15-58FC pump
- 1" main supply and return
- End plugs with purge valves
- Oventrop 3/4" differential pressure valve
- 3/4" pipe branches
- Taco 3/4" ESP zone valves
- Temperature gauge on each branch
- Isolation ball valve on each branch
- PHP "Slip-Fit" or sweat connections
Secondary components may be special ordered using 1" flanges, pipe branches, ESP zone valves
and larger pumps.
|
Add-on Modules allow up to 5 additional pump or zone valve modules to be added to the zone module
secondary loop. The end pieces are removed and the add-on module connects with the Slip-Fit fittings.
The end pieces are then attached to the end of the add-on module.
All add-on modules include:
- 1" main supply and return
- 3/4" pipe branches (2-way mixing modules use 3/4" valve with 1" pipe on
secondary)
- Same gauges and shut-off valves as secondary component modules
Indirect Water Kit includes:
- 1" pipe
- Taco 0014-F1 or Grundfos UPS 26-99FC pump
- Isolation flanges with spring check valve
- Union to connect to factory-supplies DHW supply pipe on Trinity boiler
- Capped Tee on return line to connect the return line from the Indirect Water Kit
|