|
|
Napoleon Hybrid 150 Wood Furnace - 150,000 Btu/hr - HMF150
Wood Buring Wood Furnace with Optional Triple Fuel Combination Furnace
|
Napoleon Hybrid 150 Wood Furnace - 150,000 Btu/hr - HMF150
Napoleon HMF150 - Wood Only
|
The Napoleon Hybrid HMF150 combination furnace is an extremely clean burning indoor wood furnace, with an efficiency rating
of 88.6% and EPA emissions of 3.4 grams per hour. The Napoleon Hybrid HMF150 is one of the cleanest and most
efficient combination solid fuelburning furnaces on the market today.
Go away for an extended period without worrying about keeping your wood furnace operational. The Napoleon Hybrid HMF150
switches from wood to oil or electric automatically. If the furnace runs out of wood, a second thermostat controlling
the optional oil and/or electric components will keep your home warm and toasty even if you are not at home, without
any interruptions. Even with power failures, the furnace (wood only) is designed to use gravity flow for emergency heating.
Extreme high efficiency has never been greener thanks to renewable energy and superior engineering. Four stainless steel tube
combustion system achieves a secondary burn cycle. Not only are you getting energy from the wood, but also from the wood gases
which are mixed at the precise ratio of temperature and oxygen. To achieve an extraordinary clean burn without a catalytic
combustor, horizontal jets of super heated secondary air are mixed with the fire’s smoke to burn off released smoke particles.
You can watch the torch-like secondary flames just below the ceiling during the burn resulting in more heat, cleaner air, fast
start up, less chimney maintenance and less trips to the woodpile.
|
Napoleon HMF150 Hybrid Indoor Wood Furnace - HMF150 Features:
- Clean out door
- Wood heat exchangers
- Cabinet
- Bypass damper
- Ceramic glass or solid insulated cast door
- 4 Inch Ash lip
- Ash dump & pan
- Optional stainless steel oil combustion & heat exchanger module
- Opening for ductwork
- Air control
- Direct outside air
- 6 Inch Flue
- Outside air collar
- Bypass damper handle
- Baffle
- Stainless steel secondary air tubes
- High temperature refractory liner
- Oil exhaust
- Opening for return air duct (left or right side option)
- Blower (left or right side option)
- Optional electric element (20 kW)
- Optional oil burner module
- Wood fire chamber
- Airwash to keep glass clean
- Leveling legs
Napoleon HMF150 Hybrid Indoor Wood Furnace - HMF150 Specs:
- Maximum input capacity (wood) - 150,000 Btu
- Maximum output capacity (wood) - 132,000 Btu
- Average output capacity (wood) - 85,000 Btu
- Oil Furnace Module (Optional) - 70,000-93,000 Btu
- Electric furnace module (optional) - 70,000 Btu
- Max. Log length - 24 Inches
- Blower - 3-Speed 1400 cfm
- Clearances around furnace for service - 24 back/sides 48 front
- Cold air plenum dimensions - 14 x 23
- Efficiency - 88.6%
- Electric Furnace Module (Optional) - 70,000
- Emissions - 4.7 grams per hour
- Exhaust Pipe Size - 6 Inches
- Exhaust Pipe Size(Wood/Oil combo) - 7 Inches
- Firebox dimensions - 18" w x 24" d x 15" h
- Firebox front opening - 15-3/4" w x 9-3/4" h
- Flue Diameter - 6 Inches
- Furnace dimensions (wood with blower) - 53" w x 35" d x 52" h
- Furnace dimensions (wood/electric with blower) - 65" w x 35" d x 52" h
- Furnace dimensions (wood/electric/oil with blower) - 65" w x 45" d x 52" h
- Furnace dimensions (wood/oil with blower) - 53" w x 45" d x 52" h
- Hot air plenum dimensions - 22" x 24"
- Ash drawer dimensions - 13" w x 18" d x 2-1/2" h
Napoleon HMF150 Hybrid Indoor Wood Furnace Inside:
Required components to use as add-on to Napoleon Gas Furnaces
- 60000-80000 BTU Napoleon Gas Furnace
- Add on Module HMFK-ADDON
- Transition Box HMFK-GT
Required components to use as add-on to existing furnace
Required components for wood only configuration
- Blower Box Cabinet HMFK-BMP50
Required components for wood/oil configuration
- Blower Box Cabinet HMFK-BMP50
- Stainless Steel Oil Combustion Chamber HMFK-CMBCH
- Oil Burner Module HMFK-OFRF40 OR Oil Burner Module Beckett HMFK-OFBNX
Required components for wood/electric configuration
- Blower Box Cabinet HMFK-BMP50
- Electric Furnace Module HMFK-EF20
Required components for wood/oil/electric configuration
- Blower Box Cabinet HMFK-BMP50
- Stainless Steel Oil Combustion Chamber HMFK-CMBCH
- Electric Furnace Module HMFK-EF20
- Oil Burner Module Riello HMFK-OFRF40 OR Oil Burner Module Beckett HMFK-OFBNX
|
|