|
|
My Cart
Help
|
|
|
My Cart |
Help |
|
Water Heaters on sale! Weekly Specials |
|
|
Embassy Ambassador Boilers Technical Information
View an Embassy Boiler Installation Diagram here Return to Embassy Ambassador Boiler Main Page |
| Description | BMS 10/20 | BMS 15/29 |
| Rated Heat Input (btu/h) | 87,000 | 107,000 |
| Rated Heat Output (btu/h) | 73,000 | 89,900 |
| Rated Efficiency | 86% | |
| Concentric Vent Pipe Size | 4 inches | |
| Concentric Vent Pipe Max Length | 5 Meters (15 Feet) with no elbows - and subtract 1 Meter for each Elbow | |
| Max Pressure on Heating Circuit | 30 PSI | |
| Water Temp in Heating Circuit | 90-degrees to 180-degrees | |
| Domestic Hot Water |
90-degrees to 180-degrees
Note: You must use a Anti-Scald Mixing Valve! |
|
|
Domestic Hot Water Output
60-Degrees Rise |
2.5 gpm | 3.0 gpm |
|
Domestic Hot Water Output
Intermittent Flow - 60-Degrees Rise |
3.3 gpm | 3.8 gpm |
| Minimum Domestic Hot Water Flow | N/A | |
| Gas Connection | 3/4 Inch | |
| Hot/Cold Water Connections | 3/4 Inch | |
| Dimensions | H 35" by W 18" by D 15" | H 35" by W 19" by D 16" |
| Weight | 143 Pounds | 154 Pounds |
| Voltage | 120 volts | |
|
Please Note: The Massachusetts approval code is 03-05070014. The Massachusetts MEA numbers are: BMS - G3 - 1003 - 46 The New York MEA numbers are: BMS - 389 - 99 - M This boiler is not approved in Michigan. |
||
| Please Note: Make sure you read the install manual before purchasing and installing the BMS boiler. Also, if you are using Radiant Heat Tube with this or any other boiler sold in the world - YOU MUST use only O2 Barrier PEX. |
|
|
Return to Embassy Ambassador Boiler Main Page |
|
