|
|
Bosch Aquastar 2700ES Tankless Water Heater Techs & Specs
|
Bosch AquaStar 2700ES - Applications and Sizing
|
BTU Input
|
NG: 19,000 to 199,000
LP: 19,000 to 199,000
|
|
Energy Factor
|
NG: .82
LP: .82
|
|
Thermal Efficiency
|
NG: 82%
LP: 82%
|
|
Ignition
|
Electronic (120V plugs in)
|
|
Minimum Flow Rate (gpm)
|
0.65
|
|
Flow Rates (gpm)
|
7.15 @ 45°F rise
5.9 @ 55°F rise
5.0 @ 65°F rise
4.2 @ 77°F rise
3.6 @ 90°F rise
|
|
Weight
|
67 lbs.
|
|
Dimensions
|
30 1/2" h by 17 7/8" w by 11 1/4" d
|
|
Modulating Gas Valve
|
Yes
|
|
Optional Accessories
|
Horizontal Vent Kit AQ3 (Without the Flexible intake Pipe)
Outdoor Kit (AQOK)
Remote Thermostat Control
|
|
Life Expectancy
|
20+ years
|
Model AquaStar Bosch 2700ES - Installation Specifications
|
Voltage
|
120 VAC
|
|
Exhaust Vent Size
|
3-inch Stainless Steel Sealed Cat III
|
|
Combustion Air Pipe Size
|
3-inch PVC Galvanized or another rigid pipe
|
|
Vent Options
|
Horizontal or Vertical, Direct Vent Room Sealed Combustion
|
|
Exhaust Vent Termination
|
Horizontal or Vertical
|
|
Min / Max Vent Lengths
|
Minimum length: 3 feet
Maximum length: 26 ft. (8m) with one 90 degree elbow.
Less 2.5 ft. for each additional 90 degree elbow (1.25 ft for each 45 degree elbow)
Max 3 90 degree elbows
May require an Condensate Drain - see Install Manual
|
|
Gas Connection
|
3/4 inch Male NPT
|
|
Water Connections
|
3/4 inch Male NPT
|
|
Natural Gas Pressure
|
Min: 4" WC
Max: 14" WC
|
|
Propane (LP) Gas Pressure
|
Min: 9" WC
Max: 14" WC
|
|
Water Pressure
|
Min: 30 PSI
Max: 150 PSI
|
What does Direct Vent or Room sealed mean? The 2700ES can be installed in a small space
with the ability to take in air from the outside via a 3 inch intake vent.
The Bosch AquaStar 2700ES can be vented vertically or horizontally to the
outside. The 2700ES requires a dedicated 3" stainless steel single wall
vent pipe. Other vent types will void the warranty and present a health
hazard. The 2400E also requires an electrical connection for the electronic
ignition.
|
Model AquaStar Bosch 2700ES - High Altitude Operation
|
|
Propane or Natural Gas
|
|
Altitude 0 - 2,000 ft
|
No modification
|
Altitude 2,000 ft - 8,000 ft
(For FD Codes higher than 892)
|
CO2 adjustment with flue gas analyzer required
see manual supplied from unit for instructions
|
|
For operation at elevations above 2,000 ft (610 m) the equipment
ratings shall be reduced at the rate of 4% for each 1000 feet (305m)
above sea level.
|
|
|