|
Brazed Plate Exchangers, Shell & Tube and Heating Coil Heat Exchangers
Brazed Plate Heat Exchangers for Radiant and Hydronic Heating Applications Shell & Tube Heat Exchangers for isolating Pools, Spas, Radiant Heat and other liquids from Hydronic Heat Sources. Heat Coils for use with Air Handlers and Forced Air Systems |
|
Shell & Tube Heat Exchanger |
Brazed Plate Heat Exchangers - Single Wall and Double Wall |
|
For high fluid flows with low temperature variances Shell and Tube Heat Exchangers are commonly used for pools and spas but also work well in radiant heating systems and other hydronic heating applications. Also, another use is for ponds. Use a Shell and Tube Exchanger to transfer heat from one liquid medium to another with no intermixing of the two fluids. The compact, economical design of these heat exchangers are a popular choice for both residential and industrial applications. Click here for further information and prices. |
For Isolating Radiant and Hydronic Heating Systems Brazed Plate Heat Exchangers were developed years ago and they are now the most widely used device for isolating hydronic heating circuits. Brazed Plate Heat Exchangers. The Brazed plate heat exchanger transfers heat from one liquid medium to another with no intermixing of the two fluids. It requires the fluid to be pumped into both sides of it at once. The unit we sell can transfer up to 150,000 BTU’s per hour. With from 10 to 50 flat plates, sizing is easy for your hydronic system or solar system. Brazed Plate Heat Exchangers are produced with 10 to 50 flat plates, sizing is easy for your hydronic system or solar system. The amount of heat transferred is dependent on the delta T (difference of temperature between the two fluids). It also depends on the amount of fluid moving through both sides of the heat exchanger. Click here for further information and prices. |
Heating Coils |
PMP Air Handlers |
|
Our Heating Coils are designed to be added into existing or new duct work. Use your existing boiler to turn water into hot air. This method can be up to 20% more efficient due to less duct heat/air loss. Click here for further information and prices. |
PMP Air handlers are an excelent choice for converting hot water heat to forced hot air. Air Handlers can be installed in a up flow, down flow or horizontal air flow position offering ultimate flexibility. Click here for further information and prices. |
|
Return to Hydronic Heating Supplies Main Page |