Brazed Plate Exchangers, Shell & Tube and Heating Coil Heat Exchangers
Brazed Plate Heat Exchangers for Radiant and Hydronic Heating Applications
Shell & Tube Heat Exchangers for isolating Pools, Spas, Radiant Heat and other liquids
from Hydronic Heat Sources. Heat Coils for use with Air Handlers and Forced Air Systems
|
Shell & Tube Heat Exchanger
|
Brazed Plate Heat Exchangers - Single Wall and Double Wall
|
For high fluid flows with low temperature variances
Shell and Tube Heat Exchangers are commonly used for pools and spas but also
work well in radiant heating systems and other hydronic heating applications. Also, another
use is for ponds. Use a Shell and Tube Exchanger to transfer heat from one liquid medium to
another with no intermixing of the two fluids.
The compact, economical design of these heat exchangers are a popular choice for
both residential and industrial applications.
Click here for further information and prices.
|
For Isolating Radiant and Hydronic Heating Systems
Brazed Plate Heat Exchangers were developed years ago and they are now the
most widely used device for isolating hydronic heating circuits. The Brazed plate heat exchanger transfers heat
from one liquid medium to another with no intermixing of the two fluids. It
requires the fluid to be pumped into both sides of it at once. The unit we sell
can transfer up to 150,000 BTU’s per hour. With from 10 to 50 flat plates, sizing
is easy for your hydronic system or solar system. The amount of heat transferred is
dependent on the delta T (difference of temperature between the two fluids). It
also depends on the amount of fluid moving through both sides of the heat
exchanger.
Click here for further information and prices.
|
|
Heating Coils
|
PMP Air Handlers
|
Our Heating Coils are designed to be added into existing or new duct
work. Use your existing boiler to turn water into hot air. This method
can be up to 20% more efficient due to less duct heat/air loss.
Click here for further information and prices.
|
PMP Air handlers are an excelent choice for converting hot water heat to forced hot air.
Air Handlers can be installed in a up flow, down flow or horizontal air flow position
offering ultimate flexibility.
Click here for further information and prices.
|
