|
|
Brazed Plate Heat Exchangers
Brazed Plate Heat Exchangers for PEX Radiant Heating and other Hydronic Heating
Applications where you need to separate water.
|
Brazed Plate Heat Exchangers
|
Brazed Plate Heat Exchangers
|
Brazed Plate Heat Exchangers were developed years ago and they are now the
most widely used device for isolating hydronic heating circuits.
The Brazed Plate Heat Exchangers transfer heat from one liquid medium to
another with no intermixing of the two fluids. Brazed Plate Heat Exchanger
requires the fluid to be pumped into both sides of it at once. The brazed plate heat
exchangers we sell can transfer up to 240,000 BTU’s per hour. The amount of heat transferred is
dependent on the delta T (difference of temperature between the two fluids). It
also depends on the amount of fluid moving through both sides of the heat exchanger.
Brazed Plate Heat Exchanger are required for all radiant heating systems where you
mix heating water with domestic water. Brazed Plate Heat Exchangers are produced with 10 to 50 flat plates, sizing is
easy for your hydronic system, outdoor wood boiler heating or solar hot water system. Well - not required everywhere. But,
in most places it is and for places where you can mix heating and domestic water - you should never ever mix the two. Thus,
use a Brazed Plate Heat Exchanger for all open loop heating systems!
Brazed Plate Heat Exchangers Applications:
- Outdoor Wood Boilers
- Central Heating
- Oil Coolers
- Hydronic Heating
- Solar and Geothermic Heating
- Industrial Process Heat Recovery
- Condensers and Evaporators in Refrigeration systems
- Close approach fluid-to-fluid heat transfer
- Excellent for use in wood boiler industry
|
|
Brazed Plate Heat Exchanger Sizing & Techs / Specs
Brazed Plate Heat Exchanger for Domestic Water Specs
AIC Brazed Plate Heat Exchangers PDF Documents
OKO Brazed Plate Heat Exchangers PDF Documents
Looking for Shell and Tube Heat Exchangers - Click Here!
|
