|
|
Brazed Plate Heat Exchanger - 3/4 Inch - 10 Plate - LA14-10 Buy Page
Use Brazed Plate Heat Exchangers for Isolating Hydronic Heating Circuits
|
Brazed Plate Heat Exchanger - 3/4 Inch Connection - 10 Plates
Brazed Plate Heat Exchangers transfer heat from one liquid medium to another with no intermixing of the
two fluids. Brazed Plate Heat Exchanger requires the fluid to be pumped into both sides of it at once.
Since Open Loop Heating systems are not permitted in many locations - and really not a good idea anywhere - a
brazed flat plate heat exchanger allows you to run a closed loop heating system.
|
Brazed Plate Heat Exchanger - LA1410 Specs:
- Model - LA14-10
- Plates - 10
- Max Btu - 45,000
- Connection - 3/4 NPT inch
- Max Working Pressure - 481 Psi
- Max Working Temperature - 445° F
- Weight - 2.5 pounds
- Manafactured - Europe
Brazed Plate Heat Exchangers LA1410 Features:
- Hot Side: Boiler water 180 ° F to 160°F
- Cold Side: Domestic water 40 ° F to 140°F
- Pressure Drop of 20ft of Water or less
- Stainless Steel Connections
- Plate dimensions: 3" x 7.5"
- Plates & Connections: AISI 316
- Brazing Material: Copper (Optional-Nickel)
- Single Wall Plates (Optional-Double Wall)
Brazed Plate Heat Exchanger LA1410 Output:
- Hot Side 2.6 gpm / Cold Side .5 gpm will give you about 25,000 Btu
- Hot Side 4.1 gpm / Cold Side .8 gpm will give you about 40,000 Btu
- Hot Side 5.2 gpm / Cold Side 1.0 gpm will give you about 50,000 Btu
- Hot Side 6.2 gpm / Cold Side 1.2 gpm will give you about 60,000 Btu
|
Brazed Plate Heat Exchanger LA14-10 Dimensions:
- A - 7.6 Inches
- B - 3.1 Inches
- C - 6.1 Inches
- D - 1.6 Inches
- F - N/A
|
|