|
|
Brazed Plate Heat Exchanger Double Wall - 1 Inch - 40 Plate - LB31-40-DWA Buy
Use Brazed Plate Heat Exchangers for Isolating Hydronic Heating Circuits in Heating Hydronic System, Solar Heating Systems and Outdoor Wood Boilers
|
Brazed Plate Heat Exchanger - Double Wall - 1 Inch Connection - 40 Plates
Brazed Plate Heat Exchangers transfer heat from one liquid medium to another with no intermixing of the
two fluids. Brazed Plate Heat Exchanger requires the fluid to be pumped into both sides of it at once.
The design of the double wall brazed plate heat exchanger prevents cross contamination of
fluid streams if there is an internal leak within the unit.Our Double Wall Heat Exchanger
are required for some places - so if you are in one these locations, use our Double Wall
Heat Exchanger. Since Open Loop Heating systems are not permitted in many locations -
and really not a good idea anywhere - a brazed flat plate heat exchanger allows you to run a closed loop
heating system.
|
Brazed Plate Heat Exchanger - LB31-40-DWA Specs:
- Model - LB31-40-DWA
- Plates - 40
- Walls - Double
- Connection - 3/4 NPT inch
- Max Working Pressure - 481 Psi
- Max Working Temperature - 445° F
Brazed Plate Heat Exchangers LB31-40-DWA Features:
- Hot Side: Boiler water 180 ° F to 160°F
- Cold Side: Domestic water 40 ° F to 140°F
- Pressure Drop of 20ft of Water or less
- Double Wall Stainless Steel heating plates
- Stainless Steel Connections
- Plate dimensions: 3" x 7.5"
- Plates & Connections: AISI 316
- Brazing Material: Copper (Optional-Nickel)
- Single Wall Plates (Optional-Double Wall)
- Made in Europe
|
Brazed Plate Heat Exchanger LB31-40-DWA Dimensions:
- A - 11.3 Inches
- B - 4.8 Inches
- C - 9.1 Inches
- D - 2.7 Inches
- F - N/A
|
|