|
|
Caleffi Solar Package - 2 Solar Panels Single Heat Exchanger Coil 80 Gallon Tank with ISolar Plus Controller - NAS30040 Plus Buy Page
First complete Solar Water Heater System in a box!
|
Additional Caleffi Solar Water Heating Information:
|
Caleffi Solar Heating offers prepackaged, specially engineered, complete, integrated
Solar Water Heating Systems that make the most of the sun’s abundant energy. All
materials are highly reliable and work together to ensure superior system performance.
Caleffi's complete package is ready to be professionally installed quickly and easily.
All of this plus the added assurance of a detailed warranty plan.
Caleffi's Solar Water Heating System is equally compatible with newly constructed or
existing homes, and its flexibility allows a variety of installation options,
ranging from roof installations to ground mounts.
This Caleffi Solar Water Heating system kit is intended for 2 to 4 person households
and includes the following:
This Caleffi Solar Hot Water System is the same as the NAS0040 but with the iSolar Plus Controller
Solar Panels
- (2) - NAS10406 - Flat plate Solar collector (48" x 78" x 3"), 25,000 BTU/day (SRCC Category C) - with brass 1" union half soldered on each connection with 1" union thread
- (1) - NAS10001 - Universal Solar Panel foot mount for solar collectors, flat or optional tilt mount (4 mounts and hardware)
Solar Storage Tank
- (1) - NAS20083 - 80 gallon SolarCon storage tank, lower Heat Exchanger coil, 1 temp well, electric element backup
Pumping Station
- (1) - 255060A - Dual-line solar pump station with fittings for connecting 3/4 inch SolarFlex
- (1) - 255001 - Expansion tank wall mounting kit with 3/4 inch straight thread double-check valve
- (1) - 259018 - Expansion tank, 5 gallons, 3/4 inch straight thread connection
- (1) - NA267003 - Bracket kit to mount solar pump station to storage tank, includes bracket and hardware
- (1) - 10 gallons Solar Premixed Propylene Glycol to -50%
Solar Controller
- (1) 257260A iSolar Plus with 2 speed control relay outputs and 4 input sensors plus data connection which allows for connection to optional iSolar DL2 Datalogger
with internet connection.
Panel to Pump Plumbing
- (1) - NA35001 - EPDM insulating foam tape to wrap exposed piping, 1/8 inch thick x 2 inch wide x 25 foot roll, UV resistant
- (1) - NA35002 - Black film tape to wrap foam tape, 2 inches wide x 30 foot roll, UV resistant
- (1) - NA3540-15 - 3/4 inch Caleffi SolarFlex stainless steel piping, 50 foot coil with fittings to attach directly to solar pump station and collector. Includes sensor wire.
- (1) - NA12133 - Pipe hangers for 3/4 inch SolarFlex (Pack of 4)
Pump to Tank Plumbing
- (2) - NA10093 - Solar 90 degree brass elbow, 1 inch male union half for tank HX connection
- (2) - NA3140-02 - 3/4 inch SolarFlex with insulation 6 foot long for tank HX connection to bottom solar pump station
Air Vent and Other
- (1) - 250041A - Automatic solar air vent - 1/2 inch NPT male, 360 Degree F rated
- (1) - NA29284 - Shut-off air vent valve - 1/2 inch NPT Male x Female, 360 Degree F rated
- (1) - NAC62TT6241 - Cross assembly 1/2 inch NPT Female x 1 inch union Male x temperature well x 1 inch Male union for collector sensor
- (1) - Miscellaneous fittings, gaskets, nuts and hardware kit
Caleffi Solar Water Heating System PDF Manuals and Brochures - Click Here
|
|