|
|
AirGenerate Airtap Hybrid Heat Pump Water Heaters - ATI50 and ATI66
Hybrid Electric Tank Water Heaters in 50 and 66 gallon models
|
AirGenerate Airtap Hybrid Heat Pump Water Heaters - ATI50 / ATI66
AirGenerate Airtap Hybrid Heat Pump Water Heaters
|
Nearly 25% of the energy you use in your home is used to heat water, and most of your water usuage comes from bathing
and doing laundry. The AirGenerate AirTap Hybrid heat pump water heater saves energy by providing higher recover rates
than standard electric tank water heater so you can worry less about the cost of every bath, shower and load of laundry.
AirTap Hybrid ATI66 is an ENERGY STAR certi ed water heater that uses advanced heat pump technology to extract heat from
surrounding air to heat water within the tank. The AirTap Hybrid ATI66 model is currently the only Northern Climate S
peci cation Tier 2 water heater; providing protection from freezing and other safety, performance, and comfort
improvements.
Airtap Hybrid Heat Pump Water Heaters Features:
- High eff ciency even in cooler ambient temperature
- 10,000 BTU heating capacity
- Stainless steel construction 304 (inside and out)
- 4 way reversing valve for auto defrost
- Produces hot water up to 135 F
- Backup heating elements
- 3 operation modes - Energy saver / Hybrid / High demand
- 6 Inch top exhaust duct (Optional Duct)
- Available in 50 and 66 gallon models
- 3/4 Inch condensate line
- Limited Lifetime Warranty
|
Airtap Hybrid Heat Pump Water Heaters ATI 50 Specs:
- Tank Size - 50 gallons
- Energy Factor (Hybrid mode) - 2.4
- 1st Hour Rating (Hybrid mode) - 60 Gallons
- Ambient Temp Operating Range - 20°F - 120°F
- Water Temp Set Points - 90°F - 135°F
- Output kW (Hybrid Mode) - 6.2 kW
- Heat Pump BTU Rating - 10,000
- Electric Element - 4 kW
- Backup Electric Element - 4 kW
- Compressor Make - Panasonic
- Noise - 48 db
- Voltage - 220v
- Amps - 25 / 10 (Highest/Average)
- Space (ventilated or ducted) - 250 cubic feet
- Space (unventilated) - 1,000 cubic feet
- Diameter - 25.6"
- Height - 58.3"
- Weight - 190 lbs
Airtap Hybrid Heat Pump Water Heaters ATI 66 Specs:
- Tank Size - 66 gallons
- Energy Factor (Hybrid mode) - 2.4
- 1st Hour Rating (Hybrid mode) - 75 Gallons
- Ambient Temp Operating Range - 20°F - 120°F
- Water Temp Set Points - 90°F - 135°F
- Output kW (Hybrid Mode) - 6.2 kW
- Heat Pump BTU Rating - 10,000
- Electric Element - 4 kW
- Backup Electric Element - 4 kW
- Compressor Make - Panasonic
- Noise - 48 db
- Voltage - 220v
- Amps - 25 / 10 (Highest/Average)
- Space (ventilated or ducted) - 250 cubic feet
- Space (unventilated) - 1,000 cubic feet
- Diameter - 25.6"
- Height - 69.3"
- Weight - 227 lbs
All Airtap Hybrid Heat Pump Water Heaters must be installed professionally.
|
|