Model TK-BK01
|
Wall Hanging Bracket. Mounting of the T-KD20 is accomplished 3 ways.
Free standing on a noncombustible base, wall mounting on a
noncombustible base, or hung on a wall using the optional Wall
Hanging Kit: TK-BK01.
|
|
Model TK-TV05
Click for picture (front)
Click for picture (back)
|
This is the Vent Terminator for the Direct Vent T-KD20 - and is a must for the T-KD20. The
TK-TV05 is the only vent terminator approved for the T-KD20 by Takagi. All T-KD20 Direct Vent
Tankless Water Heaters and T-KD20 Packages purchased from Houseneeds.com come with
the Vent Terminator. This Vent has a 4-inch hole for the
exhaust and a 3-inch hole for the input air. Dimensions of the Vento-Box
are: 13 3/4 inches wide by 12 inches tall by 6 3/4 inches deep. Click on text
to the left for larger pictures of front and back of the Takagi Vento-Box.
Click here for a TV05 venting diagram
|
|
Model TK-RE02
|
Temperature Remote Controller. The output temperature of the T-KD20 can be controlled with a remote
controller (up to 150 feet away) with the optional TK-RE02. The
controller model TK-RE02 can adjust the output temperature from 100°F (38°C)
to 167°F (75°C).
|
|
Model TK-TV03
|
A 4-inch back draft preventer should be used when outside temperatures
are below 32°F. The TK-TV03 prevents cold air from freezing the
heat exchanger on the T-KD20.
Click here for a TV03 venting example
|
|
Z Flex Stainless Steel Venting
|
Z Vent Z Flex Stainless Steel Venting Accessories with silicone free connections. See
our full line of pipe, exterior terminators, elbows and more. Perfect for vertical
or horizontal installation. Stainless Steel Venting is required for all Takagi T-KD20
Water Heaters (Exhaust Only)
Click here to see sizes and prices for Protech
Z Vent Z Flex Venting Supplies
|
