|
1. Peter Mangone RB5 Clip Gun
|
Peter Mangone RB5 Clip Gun
|
Just load in a strip of clips, align the gun over the PEX tubing, and fire away. The
Peter Mangone RB-5 Manual Clip Gun utilizes RB Clips with two nails - not staples - that are
driven 5/8" into the wood. The result is quick and safe attachment of radiant
heating pex tubing or plastic water pipe. And, because no power supply is needed to
operate the clip gun, it can be used in any work situation, from new homes to
retrofits, at any stage of construction.
Peter Mangone RB5 Clip Gun
|
|
2. Peter Mangone Pneumatic Clip Gun
|
RB6 Pneumatic Clip Gun
|
The Peter Mangone RB-6 Pneumatic Clip Gun installs RB Clips quickly and perfectly. For above
floor or underfloor applications in pex radiant floor heating or in potable water
pipe installations. The clip gun shoots safe, strong polyethylene clips that fit
perfectly without compressing or damaging the pex tubing or pex pipe.
Peter Mangone RB6 Pneumatic Clip Gun
|
|
3. Peter Mangone Reddi-Strip Manual Clip Gun
|
Peter Mangone RSST Staple Gun
|
The Peter Mangone Reddi-Strip™ System is
superior to other pex tubing application methods for one very important reason - the
Reddi-Strip™ Stapler utilizes flexible strips of PEX staples that are
manufactured in unitized strips of 50, rather than separately or taped
together. Manufacturing staples in strips cost less, therefore they sell for
less. The stapler is lightweight yet strong, with steel and annodized aluminum
making up the body of the tool.
Peter Mangone RSST Reddi-Strip Staple Gun
|
|
4. Peter Mangone RB Stand-off Clips
|
Peter Mangone RB Stand-off Clips
|
Installations with the patented RB Stand-Off Clips are far superior to any other method
of pex tubing attachment. Each clip fits perfectly without damaging the pex tubing - secured with
nails, not staples - no nicking, no compressing, no piercing. The stand-off design
of the clip pulls the tubing up into the clip and off the surface. This, along with the
polyethylene material of the clip, virtually eliminates expansion noises, as it prevents
wear-and-tear from the tubing's movement.
Peter Mangone P3BK Stand-off Clips for 3/8 Inch PEX
Peter Mangone P4BK Stand-off Clips for 1/2 Inch PEX
Peter Mangone P6BK Stand-off Clips for 5/8 Inch or 3/4 Inch PEX
|
|
5. Peter Mangone RB Flush Mount Clips
|
Peter Mangone RB Flush Mount Clips
|
No nicking, no compressing, no piercing... installations with the
Peter Mangone RB Flush Mount Clips are damage-free!
Available in three sizes for a perfect fit. PEX Tubing of 3/8 inch, PEX Tubing of 1/2 inch and
PEX tubing of 5/8 inch. Each clip uses two nails - not staples - to securely attach radiant tubing or PEX pipe to
any wooden surface.
Peter Mangone F4OD RB Flush Mount Clip for 3/8 Inch PEX
Peter Mangone F5OD RB Flush Mount Clip for 1/2 Inch PEX
Peter Mangone F6OD RB Flush Mount Clip for 5/8 Inch PEX
|
|
6. Peter Mangone Reddi-Strip Staples
|
Peter Mangone Reddi-Strip Staples
|
Peter Mangone Reddi-Strip™ Staples are manufactured in pre-connected strips so
they can be produced for less and therefore, sell for less! Pre-connected in
strips of 50, ready to load and fire without jamming which reduces installation
time. No more loose staples, no more temporary holding tape to remove (or jam)...
just load the stapler and fire away!
Peter Mangone S5RE Reddi-Strip Staples for 1/2 inch, 3/8 inch and 5/8 inch PEX
|
