|
|
Low E Foil Insulation / Slab Shield / House Wrap
|
|
1. Low E Foil Insulation for Underfloor PEX Heating Systems
|
Low E Foil Insulation for Underfloor PEX Heating Systems
|
Low-E foil insulation is extremely easy to install and has numerous residential, commercial and
recreational applications. It's thermal resistance, water vapor retarding, wind infiltration
barrier, pipe and duct wrap properties mean that Low E insulation can be used in various
applications where traditional insulation is not practical. While the Slab Shield
"Under Concrete Insulation" has the foil insulation in between two bubble foam layers.
This protects the foil from the concrete or water - which in both cases - will eat away
the foil if not protected.
Low E Foil Insulation for Underfloor PEX Heating Systems
Foil Poly Foam Foil Insulation with staple tabs 1 roll, 1/4 inch thick X 125 feet long X 16 inches wide - LS160/16EFEC
Foil Poly Foam Foil Insulation with staple tabs 3 rolls, 1/4 thick X 125 feet long X 16 inches wide - LS160
Foil Poly Foam Foil Insulation with staple tabs 1 roll, 1/4 thick X 100 feet long X 18 inches wide - LS180/18EFEC
Foil Poly Foam Foil Insulation with staple tabs 3 rolls, 1/4 thick X 100 feet long X 18 inches wide - LS180
Foil Poly Foam Foil Insulation with staple tabs 1 roll, 1/4 inch thick X 125 feet long X 24 inches wide - LS240/24EFEC
Foil Poly Foam Foil Insulation with staple tabs 2 rolls, 1/4 inch thick X 125 feet long X 24 inches wide - LS240
Foil Poly Foam Foil Insulation, 1/4 thick X 125 feet long X 4 feet wide - L400S/4LFLS
Econo-E: Foil Poly Foam Foil Insulation, 3/16 thick X 125 feet long X 4 feet wide - E400S/4EFES
|
|
2. Low E Foil Slab Shield
|
Low E Foil Insulation Slab Shield Systems
|
Slab-Shield foil insulation was designed specifically for under concrete insulation.
A thinner version of Slab-Shield™ for lightweight under concrete applications is also
available. Both products give you a vapor barrier and significant thermal performance
in one user friendly product. The under concrete insulation has a layer of closed cell
polyethylene foam applied to both sides of our 97% pure aluminum. Slab Shield's closed
cell foam is a vapor barrier and protects the foil from the chemical reaction that would
occur with uncured concrete.
Low E Foil Insulation lab Shield Systems
Slab Shield, Poly Foam - Foil - Poly Foam Insulation 3/8 inch X 63 feet long X 4 feet wide - 4FSFB/SE400-T
Aluminum Seam Tape 150 feet long X 2.5 inches wide - T0001
|
|
3. Low E Foil House Wrap
|
Low E Foil Insulation for House Wrap Systems
|
A house wrap that does more than simply stop drafts. This product is available in
two thickness, 3/16" and 1/4". A pure aluminum facing is heat bonded to one or
both sides of closed cell polyethylene foam, then the product is pin perforated.
This results in a house-wrap that acts not only as a superior air infiltration
barrier, effectively sealing up cracks or gaps in the external sheathing, but it
also adds a radiant barrier to the exterior of the home blocking up to 97% of radiant heat.
Low E Foil Insulation for House Wrap Systems
Foil Poly Foam Foil Perforated Insulation with single sided foil, 3/16 thick X 125 feet long X 4 feet wide - E4H00-SS/4PFNT
Foil Poly Foam Foil Perforated Insulation with double sided foil, 1/4 thick X 125 feet long X 4 feet wide - 4PFPT/L4H00/E4H00
|
|
