Heatlink EasyFit Plumbing Pex Manifold Compression Stop Tee with Shut Off - 22001
Product ID • 220010000000
Heatlink EasyFit Plumbing Pex Manifold Compression Stop Tee with Shut Off - 22001.
Heatlink Easyfit Pex Manifolds comes in 2 and 3 Port Tees and are sold with 1/2 inch PEX adapters. So just order the actual amount of ports you need. There are several different End Connection you can choose from as well as 3/4 inch Tee to allow you to send hot or cold water to a separte plumbing manifold in a different location. If you want to use this manifold with 3/8 Inch PEX tubing - buy our Coupler 1/2 by 3/8 inch for each branch you want to use with 3/8 Inch PEX.
Use silicone lubricant to lubricate dry o-rings to ensure a tight seal.
In case a leak develops during testing, remove pressure from system, clean the o-ring, and reapply silicon lube.
When placing the manifold into the supporting Compression Stop Tee w/Shut Off, place the bottom snap-in lock in the bottom (braced) notch in Compression Stop Tee w/Shut Off and then rotate it so that the top snaps into place.
In order to prevent stress on the manifold Compression Stop Tee w/Shut Offs, the supply piping must be braced or supported, parallel to the manifold and centred with the manifold’s inlets.
Manuals & Docs
Info & Links