Heatlink EasyFit Plumbing Pex Manifold Closed End Cap - 22199
Product ID • 221990000000
Heatlink EasyFit Plumbing Pex Manifold Closed End Cap - 22199.
Heatlink Easyfit Pex Manifolds comes in 2 and 3 Port Tees and are sold with 1/2 inch PEX adapters. So just order the actual amount of ports you need. There are several different End Connection you can choose from as well as 3/4 inch Tee to allow you to send hot or cold water to a separte plumbing manifold in a different location. If you want to use this manifold with 3/8 Inch PEX tubing - buy our Coupler 1/2 by 3/8 inch for each branch you want to use with 3/8 Inch PEX.
Use silicone lubricant to lubricate dry o-rings to ensure a tight seal.
In case a leak develops during testing, remove pressure from system, clean the o-ring, and reapply silicon lube.
When placing the manifold into the supporting Closed End Cap, place the bottom snap-in lock in the bottom (braced) notch in Closed End Cap and then rotate it so that the top snaps into place.
In order to prevent stress on the manifold Closed End Caps, the supply piping must be braced or supported, parallel to the manifold and centred with the manifold’s inlets.
Manuals & Docs
Info & Links