• Water to Air Heat Exchanger - 22 inch x 25 inch - HTL2225

    Product ID • HTL222500000

  • $279.75
  • Normal Ground Shipping

Overview

Use the Water to Air Heat Exchanger - 22 Inch x 25 Inch - HTL2225 with Hydronic Hot Water Boilers with or without Glycol. Use in existing Plenums and used for new and existing hot air furnaces.

Designed to be added into existing or new duct work - adds hot water space heating for new or existing water heaters or hot water boilers. Inlet and outlet connections are 1" diameter copper supply and return piping. Inside diameter for connections is 1 inch - outside diameter is 1 1/8 inches 1/2 Inch duct flange for mounting.

 

A - 22 Inches / B - 25 Inches / C - 3.5 Inches / D - 17.5 Inches

 

The amount of heat transferred is dependent on the delta T (difference of temperature between the two fluids). It also depends on the amount of fluid moving through both sides of the heat exchanger

 

 

Return Policy | Shipping Policy

Technical Specs

Water to Air Heat Exchanger - 22 Inch x 25 Inch - HTL2225 / C2225 Btu Outputs

  • At GPM 5 and 1800 CFM
    123,219 Btu
  • At GPM 5 and 2000 CFM
    129,155 Btu
  • At GPM 5 and 2400 CFM
    139,245 Btu
  • At GPM 5 and 2800 CFM
    147,524 Btu
  • At GPM 10 and 1800 CFM
    141,681 Btu
  • At GPM 10 and 2000 CFM
    150,152 Btu
  • At GPM 10 and 2400 CFM
    167,069 Btu
  • At GPM 10 and 2800 CFM
    180,406 Btu
  • At GPM 12 and 1800 CFM
    145,649 Btu
  • At GPM 12 and 2000 CFM
    154,773 Btu
  • At GPM 12 and 2400 CFM
    170,939 Btu
  • At GPM 12 and 2800 CFM
    187,007 Btu
  • All Btu's Based on Boiler Temperature of 180 Degrees

Water to Air Heat Exchanger - 22 Inch x 25 Inch - HTL2225 / C2225 Btu Features

  • Designed to be added into existing or new duct work
  • Adds hot water space heating for new or existing water heaters or hot water boilers
  • Inlet and outlet connections are 1 Inch diameter copper supply and return piping
  • Inside diameter for connections is 1 inch - outside diameter is 1 1/8 inches
  • 1/2 Inch duct flange for mounting
  • With 10 different sizes and up to 220,000 BTU’s per hour

Info & Links