• Water to Air Heat Exchanger - 20 inch x 20 inch - HTL2020

    Product ID • HTL202000000

  • $221.75
  • Normal Ground Shipping
  • Out of stock until Spring 2014

Overview

Use the Water to Air Heat Exchanger - 20 Inch x 20 Inch - HTL2020 with Hydronic Hot Water Boilers with or without Glycol. Use in existing Plenums and used for new and existing hot air furnaces.

Designed to be added into existing or new duct work - adds hot water space heating for new or existing water heaters or hot water boilers. Inlet and outlet connections are 1" diameter copper supply and return piping. Inside diameter for connections is 1 inch - outside diameter is 1 1/8 inches 1/2 Inch duct flange for mounting.

 

A - 20 Inches / B - 20 Inches / C - 3.5 Inches / D - 14.5 Inches

 

The amount of heat transferred is dependent on the delta T (difference of temperature between the two fluids). It also depends on the amount of fluid moving through both sides of the heat exchanger

 

 

Return Policy | Shipping Policy

Technical Specs

Water to Air Heat Exchanger - 20 Inch x 20 Inch - HTL2020 / C2020 Btu Outputs

  • At GPM 5 and 1600 CFM
    105,169 Btu
  • At GPM 5 and 1800 CFM
    110,911 Btu
  • At GPM 5 and 2100 CFM
    118,368 Btu
  • At GPM 5 and 2400 CFM
    124,739 Btu
  • At GPM 10 and 1600 CFM
    119,538 Btu
  • At GPM 10 and 1800 CFM
    127,376 Btu
  • At GPM 10 and 2100 CFM
    137,797 Btu
  • At GPM 10 and 2400 CFM
    148,984 Btu
  • At GPM 12 and 1600 CFM
    122,692 Btu
  • At GPM 12 and 1800 CFM
    131,083 Btu
  • At GPM 12 and 2100 CFM
    142,238 Btu
  • At GPM 12 and 2400 CFM
    152,253 Btu
  • All Btu's Based on Boiler Temperature of 180 Degrees

Water to Air Heat Exchanger - 20 Inch x 20 Inch - HTL2020 / C2020 Btu Features

  • Designed to be added into existing or new duct work
  • Adds hot water space heating for new or existing water heaters or hot water boilers
  • Inlet and outlet connections are 1 Inch diameter copper supply and return piping
  • Inside diameter for connections is 1 inch - outside diameter is 1 1/8 inches
  • 1/2 Inch duct flange for mounting
  • With 10 different sizes and up to 220,000 BTU’s per hour

Info & Links