• Water to Air Heat Exchanger - 19 inch x 20 inch - HTL1920

    - 124925 Btu at 10 GPM and 1600 CFM

    Product ID • HTL192000000

  • $209.75
  • Normal Ground Shipping

Overview

Use the Water to Air Heat Exchanger - 19 Inch x 20 Inch - HTL1920 with Hydronic Hot Water Boilers with or without Glycol. Use in existing Plenums and used for new and existing hot air furnaces.

Designed to be added into existing or new duct work - adds hot water space heating for new or existing water heaters or hot water boilers. Inlet and outlet connections are 1" diameter copper supply and return piping. Inside diameter for connections is 1 inch - outside diameter is 1 1/8 inches 1/2 Inch duct flange for mounting.

 

A - 19 Inches / B - 20 Inches / C - 3.5 Inches / D - 14.5 Inches

 

The amount of heat transferred is dependent on the delta T (difference of temperature between the two fluids). It also depends on the amount of fluid moving through both sides of the heat exchanger

 

 

Return Policy | Shipping Policy

Technical Specs

Water to Air Heat Exchanger - 19 Inch x 20 Inch - HTL1920 / C1920 Btu Outputs

  • At GPM 5 and 1400 CFM
    96,849 Btu
  • At GPM 5 and 1600 CFM
    108,760 Btu
  • At GPM 5 and 2000 CFM
    116,007 Btu
  • At GPM 5 and 2200 CFM
    123,147 Btu
  • At GPM 10 and 1400 CFM
    108,886 Btu
  • At GPM 10 and 1600 CFM
    124,925 Btu
  • At GPM 10 and 2000 CFM
    135,015 Btu
  • At GPM 10 and 2200 CFM
    147,368 Btu
  • At GPM 12 and 1400 CFM
    111,481 Btu
  • At GPM 12 and 1600 CFM
    128,599 Btu
  • At GPM 12 and 2000 CFM
    139,491 Btu
  • At GPM 12 and 2200 CFM
    150,589 Btu
  • All Btu's Based on Boiler Temperature of 180 Degrees

Water to Air Heat Exchanger - 19 Inch x 20 Inch - HTL1920 / C1920 Btu Features

  • Designed to be added into existing or new duct work
  • Adds hot water space heating for new or existing water heaters or hot water boilers
  • Inlet and outlet connections are 1 Inch diameter copper supply and return piping
  • Inside diameter for connections is 1 inch - outside diameter is 1 1/8 inches
  • 1/2 Inch duct flange for mounting
  • With 10 different sizes and up to 220,000 BTU’s per hour

Info & Links