• Water to Air Heat Exchanger - 18 inch x 18 inch - HTL1818

    Product ID • HTL181800000

  • $169.75
  • Normal Ground Shipping
  • Out of stock until Spring 2014

Overview

Use the Water to Air Heat Exchanger - 18 Inch x 18 Inch - HTL1818 with Hydronic Hot Water Boilers with or without Glycol. Use in existing Plenums and used for new and existing hot air furnaces.

Designed to be added into existing or new duct work - adds hot water space heating for new or existing water heaters or hot water boilers. Inlet and outlet connections are 1" diameter copper supply and return piping. Inside diameter for connections is 1 inch - outside diameter is 1 1/8 inches 1/2 Inch duct flange for mounting.

 

A - 18 Inches / B - 18 Inches / C - 3.5 Inches / D - 13 Inches

 

The amount of heat transferred is dependent on the delta T (difference of temperature between the two fluids). It also depends on the amount of fluid moving through both sides of the heat exchanger

 

 

Return Policy | Shipping Policy

Technical Specs

Water to Air Heat Exchanger - 18 Inch x 18 Inch - HTL1818 / C1818 Btu Outputs

  • At GPM 5 and 1200 CFM
    85,400 Btu
  • At GPM 5 and 1400 CFM
    92,166 Btu
  • At GPM 5 and 1600 CFM
    98,057 Btu
  • At GPM 5 and 1800 CFM
    103,251 Btu
  • At GPM 10 and 1200 CFM
    94,795 Btu
  • At GPM 10 and 1400 CFM
    103,538 Btu
  • At GPM 10 and 1600 CFM
    111,322 Btu
  • At GPM 10 and 1800 CFM
    118,316 Btu
  • At GPM 12 and 1200 CFM
    96,785 Btu
  • At GPM 12 and 1400 CFM
    106,019 Btu
  • At GPM 12 and 1600 CFM
    114,295 Btu
  • At GPM 12 and 1800 CFM
    121,799 Btu
  • At GPM 12 and 2200 CFM
    140,825 Btu
  • All Btu's Based on Boiler Temperature of 180 Degrees

Water to Air Heat Exchanger - 18 Inch x 18 Inch - HTL1818 / C1818 Btu Features

  • Designed to be added into existing or new duct work
  • Adds hot water space heating for new or existing water heaters or hot water boilers
  • Inlet and outlet connections are 1 Inch diameter copper supply and return piping
  • Inside diameter for connections is 1 inch - outside diameter is 1 1/8 inches
  • 1/2 Inch duct flange for mounting
  • With 10 different sizes and up to 220,000 BTU’s per hour

Info & Links