• Water to Air Heat Exchanger - 16 inch x 18 inch - HTL1618

    - 71288 Btu at 10 GPM and 800 CFM

    Product ID • HTL161800000

  • $154.75
  • Normal Ground Shipping

Overview

Use the Water to Air Heat Exchanger - 16 inch x 18 inch - HTL1618 with Hydronic Hot Water Boilers with or without Glycol. Use in existing Plenums and used for new and existing hot air furnaces.

Designed to be added into existing or new duct work - adds hot water space heating for new or existing water heaters or hot water boilers. Inlet and outlet connections are 1" diameter copper supply and return piping. Inside diameter for connections is 1 inch - outside diameter is 1 1/8 inches 1/2 Inch duct flange for mounting.

 

A - 16 Inches / B - 18 Inches / C - 3.5 Inches / D - 11.5 Inches

 

The amount of heat transferred is dependent on the delta T (difference of temperature between the two fluids). It also depends on the amount of fluid moving through both sides of the heat exchanger

 

 

Return Policy | Shipping Policy

Technical Specs

Water to Air Heat Exchanger - 16 inch x 18 inch - HTL1618 / C1618 Btu Outputs

  • At GPM 5 and 800 CFM
    65563 Btu
  • At GPM 5 and 1000 CFM
    74152 Btu
  • At GPM 5 and 1200 CFM
    82598 Btu
  • At GPM 5 and 1400 CFM
    89045 Btu
  • At GPM 10 and 800 CFM
    71288 Btu
  • At GPM 10 and 1000 CFM
    82154 Btu
  • At GPM 10 and 1200 CFM
    91567 Btu
  • At GPM 10 and 1400 CFM
    99843 Btu
  • At GPM 12 and 800 CFM
    72310 Btu
  • At GPM 12 and 1000 CFM
    83611 Btu
  • At GPM 12 and 1400 CFM
    93472 Btu
  • At GPM 12 and 1200 CFM
    102203 Btu
  • All Btu's Based on Boiler Temperature of 180 Degrees

Water to Air Heat Exchanger - 16 Inch x 18 Inch - HTL1618 / C1618 Btu Features

  • Designed to be added into existing or new duct work
  • Adds hot water space heating for new or existing water heaters or hot water boilers
  • Inlet and outlet connections are 1 Inch diameter copper supply and return piping
  • Inside diameter for connections is 1 inch - outside diameter is 1 1/8 inches
  • 1/2 Inch duct flange for mounting
  • With 10 different sizes and up to 220,000 BTU’s per hour

Info & Links