• Water to Air Heat Exchanger - 12 inch x 12 inch - HTL1212

    - 56895 Btu at 10 GPM and 800 CFM

    Product ID • HTL121200000

  • $91.75
  • Normal Ground Shipping

Overview

For use with Hydronic Hot Water Boilers with or without Glycol. Use in existing Plenums and used for new and existing hot air furnaces.

Designed to be added into existing or new duct work - adds hot water space heating for new or existing water heaters or hot water boilers. Inlet and outlet connections are 1" diameter copper supply and return piping. Inside diameter for connections is 1 inch - outside diameter is 1 1/8 inches 1/2 Inch duct flange for mounting.

 

A - 12 Inches / B - 12 Inches / C - 3.5 Inches / D - 7.75 Inches

 

The amount of heat transferred is dependent on the delta T (difference of temperature between the two fluids). It also depends on the amount of fluid moving through both sides of the heat exchanger

 

 

Return Policy | Shipping Policy

Technical Specs

Water to Air Heat Exchanger - 12 inch x 12 inch - HTL1212 / C1212 Btu Outputs

  • AT GPM 5 and 600 CFM
    44,452 Btu
  • At GPM 5 and 800 CFM
    51,846 Btu
  • At GPM 5 and 1000 CFM
    57,659 Btu
  • At GPM 10 and 600 CFM
    47,978 Btu
  • At GPM 10 and 800 CFM
    56,895 Btu
  • At GPM 10 and 1000 CFM
    64,294 Btu
  • At GPM 12 and 600 CFM
    46,807 Btu
  • At GPM 12 and 800 CFM
    57,836 Btu
  • At GPM 12 and 1000 CFM
    65,550 Btu
  • All Btu's Based on Boiler Temperature of 180 Degrees

Water to Air Heat Exchanger - 12 inch x 12 inch - HTL1212 / C1212 Btu Features

  • Designed to be added into existing or new duct work
  • Adds hot water space heating for new or existing water heaters or hot water boilers
  • Inlet and outlet connections are 1 Inch diameter copper supply and return piping
  • Inside diameter for connections is 1 inch - outside diameter is 1 1/8 inches
  • 1/2 Inch duct flange for mounting
  • With 10 different sizes and up to 220,000 BTU’s per hour

Info & Links