-
Takagi Tankless Water Heater - Includes Remote Control - Natural Gas - T-D2-IN NG
- 199000 BTU - Indoor Installation
Product ID • TD2INNG00000
Overview
The Takagi T-D2-IN model was specifically designed for light commercial applications. The Takagi Tankless Water Heater T-D2-IN offers all the features of the Revolutionary T-K3-Pro model and now has an outside specific model along with a max flow rate of 10.0 GPM. Try the new T-D2-IN and see why Takagi offers the most durable and best quality commercial tankless heaters on the market!
The Takagi T-D2-IN is ideal for light-commercial applications and utilizes HRS35 copper alloy for the heat exchanger tubing, the T-D2-IN is also suited for heavier-residential usages such as space-heating and domestic recirculation systems.
In addition to the added durability, the T-D2-IN incorporates all the features of the popular T-K3-Pro while increasing the max flow rate to 10.0GPM and providing an outside specific model. The Takagi Gas Tankless Water Heater T-D2-IN is Energy Star Certified.
TM-RE30 Included with T-D2-IN.
Cost-efficient and environmentally friendly, the T-D2-IN can be converted into a direct-vent unit by using the optional TV10 conversion kit for installation in a garage, a utility closet or any confined space in which makeup air may be limited.
The four preset temperatures on the unit are: 104°F, 113°F, 122°F, 131°F, 140°F, 158°F, 176°F and 185°F. To achieve any temperatures other than those presets, you will require the TK-RE30 temperature controller, which is included with the Takagi T-D2IN and T-D2-OS.
Manuals & Docs
Technical Specs
Takagi T-D2-IN Tankless Water Heater Spes
- Power Input
- Natural Gas 11,000-199,000 BTU
- Power Input
- Propane Gas 11,000-199,000 BTU
- Water Pressure Minimum
- 15 PSI
- Maximum
- 150 PSI
- Gas Connection
- (Min) 3/4 inch 53 Male NPT
- Water Connection
- 3/4 inch Male NPT
- Natural Manifold Pressure
- 2 to 2.5 inches W.C.
- Propane Gas Manifold Pressure
- 3.7 to 4.5 inches W.C.
- Electrical Supply
- 120 Volts
- Weight
- 39 lbs
- Height
- 20.5 inches
- Width
- 13.8 inches
- Depth
- 8.5 inches
- Maximun Water Flow
- 10 GPM
- Minimum Flow to Activate
- .5 GPM
- Temperature Settings without remote controller
- 104°F, 113°F, 122° F, 131°F, 140°F, 158°F, 176°F and 185°F
- Temperature Settings with Temperature Remote Controller TK-RE30 Included with the T- D2-IN
- 99°, 100°, 102°, 104°, 106°, 108°, 110°, 111°, 113°, 115°, 117°, 122°, 131°, 140°, 149°, 158°, 167°, 176° and 185°
- Exhaust Vent Size
- 4 Inch Sealed Stainless Steel CAT III Vent Pipe (50 feet max length subtract 5 feet each 90 degree elbow with a maximun 5 elbows)
- Intake Vent Size
- (optional) 3 Inch Piping
- Ignition
- Electronic Ignition
- Backflow Preventer
- TK-BF01 Required in weather condtions bedlow 36 F degrees
- Vertical Condensation Drain
- Install per local code
- Flow Rates (50 degree Input Water Assumed)
- 90°F rise / 3.6 gallons per minute
- Flow Rates (50 degree Input Water Assumed)
- 80°F rise / 4.1 gallons per minute
- Flow Rates (50 degree Input Water Assumed)
- 70°F rise / 4.7 gallons per minute
- Flow Rates (50 degree Input Water Assumed)
- 60°F rise / 5.4 gallons per minute
- Flow Rates (50 degree Input Water Assumed)
- 55°F rise / 5.9 gallons per minute
- Flow Rates (50 degree Input Water Assumed)
- 50°F rise / 6.5 gallons per minute
- Flow Rates (50 degree Input Water Assumed)
- 40°F rise / 7.0 gallons per minute
Info & Links