• Takagi Tankless Water Heater - Natural Gas - T-M32 ASME NG

    - 240000 BTU

    Product ID • TAKTMASMENG0

  • $1,279.75
  • Free Ground Shipping
  • Special Order - Allow up to 3-4 weeks for delivery

Overview

The Takagi T-M32 ASME tankless water heater was developed specifically for commercial applications. The T-M32 ASME offers 240,000 BTU and up to 9 GPM (Max). The versatility of being installed either indoor, outdoor, or with a direct vent, all with the same unit. Easy-link capability up to 4 units. You may connect up to 20 units and generate over 180 GPM using a multi-controller unit. uses HRS copper, the most durable copper in the industry. HRS copper is stronger and harder than the standard copper, making it much more resilient against erosion and leaks.

8 new dipswitch temperature settings: 100 F, 115 F, 120 F, 135 F, 145 F, 155 F, 165 F, and 185 F. These temperatures are better suited for commercial applications. 7-segment LED for error codes: Remote controller is not required to pinpoint problems.

The drum thickness has been increased 25% for greater heat exchanger performance and to be more resistant to thermal stress.

Increase in fin pitch: Fins are more "spread out" which improves the durability of the heat exchanger. More space in-between the fins reduces build-up. Higher temperatures at the top of heat exchanger reduces condensation.

The Takagi T-M32 ASME on demand water heater is factory preset at 120°. You can change the output temperature with the internal dipswitches to 100°, 115°, 120°, 135°, 145°, 155°, 165° or 185°. If you want to use any other temperatures than this you can purchase the optional Temperature Remote Controller (TM-RE30) that will allow the T-M32 ASME to have output temperatures from 100° to 185°.

Please Note: Hot Water Heater Temperatures over 125°F can cause severe burns instantly or death from scalding. Children, disabled and elderly are at the highest risk of being scalded. Feel water temperature before bathing or showering.

Return Policy | Shipping Policy

Manuals & Docs

Technical Specs

Takagi Mobius T-M32 ASME Tankless Water Heaters Specs

  • Natural Gas
    24,000-240,000 BTU
  • Propane Gas
    24,000-240,000 BTU
  • Water Pressure Minimum
    15 PSI
  • Maximum
    150 PSI
  • Gas Connection (Min)
    3/4 inch Male NPT
  • Water Connection
    3/4 inch Male NPT
  • Natural Gas Pressure Inlet Minimum
    5 inch WC
  • Maximum
    10.5 inch WC
  • LP Gas Pressure Minimum
    8 inch WC
  • Maximum
    14.0 inch WC
  • Electrical Supply
    120 Volts
  • Weight
    56 lbs
  • Height
    23.6 inches
  • Width
    18.5 inches
  • Depth
    8.9 inches
  • Minimum Flow to Activate
    .5 GPM
  • Flow Rates(50 degree Input Water Assumed)
    90°F rise / 4.1 gallons per minute
  • Flow Rates(50 degree Input Water Assumed)
    80°F rise / 4.8 gallons per minute
  • Flow Rates(50 degree Input Water Assumed)
    70°F rise / 5.3 gallons per minute
  • Flow Rates(50 degree Input Water Assumed)
    60°F rise / 6.1 gallons per minute
  • Flow Rates(50 degree Input Water Assumed)
    55°F rise / 6.5 gallons per minute
  • Flow Rates(50 degree Input Water Assumed)
    50°F rise / 7.2 gallons per minute
  • Flow Rates(50 degree Input Water Assumed)
    40°F rise / 9.0 gallons per minute
  • Manifold Pressure
    Natural 2.5 inch WC
  • Propane
    4.4 inch WC
  • Exhaust Vent Size
    4 inch Sealed Stainless Steel CAT III Vent Pipe (50 feet max length subtract 5 feet each 90 degree elbow with a maximun 5 elbows)
  • Intake Vent Size (optional)
    4 inch - Sealed Stainless Steel Piping
  • Ignition
    Electronic Ignition
  • Backflow Preventer
    TK-BF01 Required in weather condtions bedlow 36 F degrees
  • Vertical Condensation Drain
    Install per local code

Info & Links