• 480 Square Foot Underfloor PEX Radiant Heat Package

    - 1/2 inch by 500 and 300 foot rolls of Oxygen Barrier PEX-A - 3 Port Housepex Manifold - 30 feet of Protection Sleeve - 6 Plastic Bend Supports

    Product ID • UFPCK4800008

  • $573.75
  • Normal Ground Shipping

Overview

Under Floor for up to 480 Square Feet - 8 Inches on center. 

This PEX Underfloor Kit is used for up to 480 square feet floor with a typical layout. You can look at our learning center for more info or Info & Links on this page.  Supply requirements will vary from job to job. Please contact us if you have any questions.

This Underfloor Heating Systems a specific size of floor heating. For larger PEX systems, please look at our larger underfloor heating system packages. 

This PEX Radiant Under Floor PEX Package includes:

One - 500 Foot PEX Roll and One 300 Foot PEX Roll of 1/2 Inch Oxygen Barrier HeatLink PEX-A
One - 3 Port Housepex PEX Manifold
Three - 10 Foot Length of Protection Sleeve
Six - Pastic Bend Supports

Optional Products:

Slide Brackets - for suspending PEX Under the Floor
Zip Ties - To attach the PEX Tubing to slide brackets to keep PEX from Moving
Heat Transfer Plates - the most efficient way to send the heat from the PEX to the floor
Tallon Clamps - cost effictive way to attach to under the floor
Peter Mangone Clip Guns and PEX Clips - another efficient way to attach PEX to under the floor
Foil Insulation - when using anything than transfer plates - you need to use foil insulation to refelect radiant heat up to the floor and create a dead air under the floor
PEX cutter - to cut pex cleanly
Pressure Test Kit - required by code in many locations that PEX is installed in pressurized condition 

Return Policy | Shipping Policy

Technical Specs

Additional Items for Radiant Heat Under Floor Package 480 - Optional Products

  • Slide Brackets
    114 Brackets for 480 Square Feet
  • Zip Ties
    3 or 4 Bags
  • Extruded Aluminum Heat Transfer Plates 4 inches by 48 inches
    181 Plates for 480 Square Feet
  • Talon Clamps
    228 Clamps for 480 Square Feet
  • 16 Inch Foil Insulation
    3 Rolls
  • Pressure Test Kit
    With 1 Inch by 1/2 Inch bushing for use with optional 1 inch ball valves and Teflon tape for assembly
  • You can purchase these products by clicking images under related products on the right side of this page and quantity that you may need of optional items may vary from project to project

Info & Links