• Legend Versatherm Main Panel - Carton of 10 Panels - VT-MPX10

    - for 1/2 inch Pex - Each Panel includes 2 Tube Shields - 31.5 inches by 15.75 inches - 34.4 Square Feet

    Product ID • VTMPX1000000

  • $169.75
  • Normal Ground Shipping

Overview

Legend Versatherm Main Panel - for 1/2 inch Pex. Each Panel includes 2 Tube Shields - 31.5 inches by 15.75 inches - 34.4 Square Feet - Carton of 10 Panels - VT-MPX10.

The Legend VersaTherm Floor System is an innovative, low-profile, high-output, snap-fit pex radiant panel system ideally suited for both new construction and renovation projects. Unlike any dry radiant system on the market, the panels snap together in minutes, saving significant labor costs. The 3/4 inch thick panels are pre-insulated and naturally water resistant- great for retrofits and basements. Our VersaTherm use of 1/2 inch PEX tubing allows for greater circuit lengths. The tubing is 100% protected by metal and the entire surface transfers heat. You can cut the main panels to size and use our optional fillers for non-active space or use standard 3/4 inch plywood. 

 

 

Typical Basement Installation:

1) Carpet & Pad – VersaTherm panels “float” un-attached over top of the existing concrete slab and vapor barrier; tack strips for carpet are installed on plywood filler around perimeter of room between VersaTherm panels and wall; carpet and pad are installed as normal on top of the VersaTherm panel layer.

2) Floating Floor Systems (engineered wood laminates) – VersaTherm panels "float" un-attached over top of the existing concrete slab and vapor barrier; the floating floor panels are installed as normal on top of the VersaTherm panel layer.

 

 

Typical Over Floor Installation:

1) Carpet & Pad – VersaTherm panels "float" un-attached over the top of the wood sub-floor; tack strips for carpet are installed on plywood filler around perimeter of room between VersaTherm panels and wall; carpet and pad are installed as normal on top of the VersaTherm panel layer.

2) Hardwood – VersaTherm panels are "sandwiched" between the wood sub-floor and wood nailing surface (typical ¾" plywood); 2" screws fasten wood nailing surface down through VersaTherm panels into wood sub-floor; hardwood floor covering is installed as normal on top of the wood nailing surface.

3) Ceramic Tile - VersaTherm panels are "sandwiched" between the wood sub-floor and cement board (typical ¾" thick); 2" screws fasten cement board down through VersaTherm panels into wood sub-floor (mark and avoid tubing locations); ceramic tile floor covering is installed as normal on top of the cement board and isolation membrane.

 

Return Policy | Shipping Policy

Manuals & Docs

Technical Specs

Legend Versatherm Main Panel VT-MPX10 Features

  • Labor Saving snaps together
  • Main Panel Size is 31 1/2 Inches by 15 3/4 Inches by 3/4 Inches
  • Main Panel 3.44 Square Feet
  • Installed over existing Floor
  • Installed over existing Cement Floor
  • 1/2 inch PEX tubing for longer circuit lengths
  • PEX Tubing is protected against damage
  • Panels are pre-insulated great for retrofits and basements
  • Naturally water resistant
  • Entire surface transfer sheat
  • Panels are easily cut for tight installations
  • PEX Tube spacing is 8 inches on center