Lotel Radiant Slab Heat Mesh-Ups
Lotel Mesh-Up, the new all plastic "chair," is flexible, elastic, easily and quickly attached to the mesh without ties. Above all it's capable of returning the mesh approximately to its original position after being subjected to the loads commonly encountered while placing the mesh in the forms and spreading the concrete. Flexible Support for Reinforcing Mesh in Radiant Heating Slabs. Once you have the mesh where you want it - attach the PEX Tubing with zip ties as needed.
The flexible plastic Mesh-up will help solve the problems of concrete slabs at grade and will: Aid in getting the mesh off the ground. Help to support mesh above the membrane before and during pouring. Snap easily, quickly and firmly to mesh where the wires intersect; therefore, they do not rotate or fall off. Deflect when mesh is pressed down and then rebound; preventing wire bending over Mesh-up©. Resist being pressed into subsurface because of large base ring. Use sand disk over soft fill. Reduce membrane puncture from sharp wire ends. Reduce supervision and require no "hook man".