Menu
  • Westinghouse Indirect Water Heater Tank 60 Gallons - WI060

    - 316 Stainless Steel - Single Heat Exchanger

    Product ID • WI0600000000

  • $1,524.00
  • Quantity:
  • Estimated Overland Truck Shipping Truck Shipping

Overview

The Westinghouse WI060 60 gallon stainless steel indirect water heater is a culmination of over 25 years of indirect system manufacturing experience. Built using high quality 316L stainless steel materials, the tank and heat exchanger eliminate the need for anode rods, resist corrosion, and allow for the system to be virtually maintenance free. The corrugated heat exchanger draws energy from a boiler to heat the domestic hot water with an extremely low pressure drop. The built in auxiliary port for recirculation increases overall efficiency by eliminating short cycling of the connected boiler. The stainless steel indirect water heater generates over 60% more hot water than many water heaters of similar size and offers extreme savings.

What is an indirect water heater? An indirect is a storage tank with a heating coil built inside the tank. Hot water from any hydronic heating boiler is circulated through the coil inside to heat all the water in the tank. The unit is piped like any other heating zone.

Return Policy | Shipping Policy

Manuals & Docs

Technical Specs

Westinghouse Indirect Water Heater Tank WI060 Techs and Specs

  • Capacity Gallons
    60
  • Heat Exchangers
    Single
  • Stainless Steel
    316 L
  • Recommended Flow Rate Boiler Water Flow Through Coil (gpm)
    10
  • Heat Exchanger Surface Area
    15 square feet
  • Pressure Drop Through Coil (in feet)
    2.3
  • Max Working Pressure (psi feet)
    150 PSI
  • Test Pressure (psi feet)
    300 PSI
  • Heat Exchanger Output
    155,230 Btu/Hr
  • Output First Hour (Gallons *)
    303
  • Connection Domestic
    1 Inches MNPT
  • Connection Boiler NPT
    1 Inches
  • Auxiliary Port
    3/4 Inches MNPT
  • Tank Insulation
    2 Inch Thick Foam
  • Diamter Size
    23 1/2 Inch
  • Height
    54 5/8 Inches
  • Shipping Weight
    140 pounds
  • * Based on a 200 degree boiler water supply and a 60 degree cold water input. For 180 degree F boiler water supply multiply by ratings by 0.86

Westinghouse Indirect Water Heater Tank WI060 Features

  • Tanks and coils are all stainless steel construction
  • Large smooth wall coils deliver full output for years. No finned tubing to collect lime and sediment
  • Includes over 2 Inches of insulation, less than 1 Degree /hr. heat loss, and a flexible thermoplastic jacket that will not dent or corrode
  • Brass drain and relief valves are factory installed
  • Honeywell 6006 aquastat control is standard
  • Limited lifetime warranty residential installations 5 years commercial
  • Made in the USA

Info & Links