• Heat-Flo 316 Stainless Steel Hydronic Buffer Tank - 22.8 Gallons with - HF-22BT-1.25

    - 1-1/4 inch Connections - 2 Taps

    Product ID • HF22BT125000

  • $629.75
  • Quantity:
  • Estimated Overland Truck Shipping Truck Shipping


Heat-Flo 316 Stainless Steel Hydronic Buffer Tank with 22.8 Gallons, 1-1/4 inch Connections and 2 Taps - HF-22BT2-1.25.

The primary application of a buffer tank is to Eliminate Short Cycling and reduce heat pump, chiller, or boiler short cycling. Hydronic buffer tanks are used in systems operating below the design load condition, which is most of the time, or in systems having several low BTU cooling or heating loads calling at different times. This can cause the heat pump or the boiler to short cycle, resulting in reduced operating efficiency and shorter equipment life.

The primary application for the HF-22 BT is to reduce low-mass modulating, condensing boiler short cycling. The supply side of the boiler is piped through your closely spaced tees and then to the top of the tank. The lower side port is then piped to the return port on the boiler.

Return Policy | Shipping Policy

Manuals & Docs

Technical Specs

Heat-Flo 316 Stainless Steel Hydronic Buffer Tank HF-22BT-1.25 Techs and Specs

  • Capacity Gallons
  • Max Working Pressure (psi feet)
    60 PSI
  • Connection Boiler NPT
    1 1/4 Inches
  • Taps
  • Diamter Size
    22 1/2 Inch
  • Internal Coils
  • Height
    27 Inches
  • Manufactured
  • Shipping Weight
    35 pounds

Info & Links