• Heat-Flo 316 Stainless Steel Indirect Water Heater Tank with Single Heat Exchanger and Electric Back-up - 115 Gallon - HF-115E

    Product ID • 115E00000000

  • $2,979.00
  • Estimated Overland Truck Shipping Truck Shipping

Overview

The Heat-Flo stainless steel indirect water heater HF-115E with electric backup is ideal for Solar Hot Water Heating system where you need a backup when there is not enough heat from the Sun. The high quality of the design and fabrication of these complete stainless steel heaters ensure efficient, maintenance-free operation and continuous supply of hot water. These rugged units are designed for heating large volumes of domestic or process water for residential, commercial or industrial applications.

If you are looking for a lot of hot water, that is much faster and a lot cheaper, the Heat-Flo indirect water heater is the answer.

What is an indirect water heater? An indirect is a storage tank with a heating coil built inside the tank. Hot water from any hydronic heating boiler is circulated through the coil inside to heat all the water in the tank. The unit is piped like any other heating zone.

 

Return Policy | Shipping Policy

Manuals & Docs

Technical Specs

Heat-Flo 316 Stainless Steel Indirect Water Heater Tank HF-115E Techs and Specs

  • Capacity Gallons
    80
  • Electric Backup Watts
    3,500
  • Electric Backup Volts
    240
  • Heat Exchangers
    Single
  • Min Boiler Water Flow Through Coil (gpm)
    10
  • Pressure Drop Through Coil (in feet)
    3.9
  • Coil Heating Surface (sq.feet)
    8.3
  • Max Working Pressure (psi feet)
    150 PSI
  • Heat Exchanger Output
    139,700 Btu/Hr
  • Output First Hour (Gallons *)
    365
  • Output Continuous (Gallons *)
    265
  • Connection Domestic NPT
    3/4 Inch
  • Connection Boiler NPT
    1 Inch
  • Diamter Size
    28 Inch
  • Height
    74 Inches
  • Shipping Weight
    180 Pounds
  • * Based on a 200 degree boiler water supply and a 50 degree cold water input. For 180 degree F boiler water supply multiply by ratings by 0.86

Heat-Flo 316 Stainless Steel Indirect Water Heater Tank HF-115E Features

  • Tanks and coils are all stainless steel construction
  • Large smooth wall coils deliver full output for years. No finned tubing to collect lime and sediment
  • Includes thermostat well to control solar input
  • Large 4 Inch X 10 Inch electrical box with pre-wired heating element, thermostat, and high limit on electric backup units
  • Includes over 2 Inches of insulation, less than 1 Degree /hr. heat loss, and a flexible thermoplastic jacket that will not dent or corrode
  • All connections are on top for a neat, clean installation
  • Brass drain and relief valves are factory installed
  • Honeywell 4006 aquastat control is standard
  • Limited lifetime warranty residential installations 5 years commercial
  • Made in the USA

Info & Links