• Honeywell Single-Function Aquastat Control with 1/2 inch Well - L4006A1967

    - 5 to 30 Degree F Adj Differential - 1 1/2 Inch Installation Depth

    Product ID • 4006A1967001

  • $91.20
  • Normal Ground Shipping

Overview

Honeywell Single-Function Aquastat Control with 1/2 inch Well - 5 to 30 Degree F Adj Differential  - 1 1/2 Inch Insulation Dept - L4006A1967.

Honeywell Aquastat Controls immersion type controls for limiting or regulating temperatures of liquids in boilers or hot water tanks.

Return Policy | Shipping Policy

Technical Specs

Honeywell Aquastat Control L4006A1967 Techs and Specs

  • Totally enclosed Micro Switch snap-acting switches operates on temperature rise to setpoint
  • Visible control point scale & external adjustment screw permit easy setting
  • Vertical or horizontal insertion of the sensing element
  • Well immersion of the sensing element
  • Temperature Ratings (operating range): 100 to 240 Degrees F
  • Electric Ratings (full load): 5.1 amps at 240Vac, 8.0 amps at 120Vac
  • Electric Ratings (locked rotor): 30.6 amps at 240Vac, 48.0 amps at 120Vac
  • Spud Size: 3/4 Inches
  • Bulb Size: 3/8 Inches X 2 7/8 Inches copper
  • Differential: 5 to 30 Degrees F adj.
  • Insulation depth: 1 1/2 Inches
  • Maximum pressure rating: Capillary Bulb (direct immersion) = 200psi (1379kpa)
  • Immersion Well = 255psi (1758kpa)
  • Horizontal or vertical mounting
  • Single-Function
  • High or low limit application
  • Case dimensions: 5 5/8 Inches high X 2 Inches wide X 2 1/8 Inches deep
  • Includes 1 1/2 Inches insulation and heat-conductive compound
  • Stop factory set at 240 Degrees F
  • Approvals = Underwriters Laboratories, Inc.: UL component recognized - File No. MP466, Vol. 6, Sec. 1, Guide No. MBPR2
  • Approvals = Canadian Standards Association: CSA certified, File No. LR95329-1
  • Approvals = American Gas Association: IAS, AGA Certified