• Eskabe Heater - Direct Vent Gas Space Heater - Natural Gas - DVEL 12 NG

    - 11,000 BTU - Gas Wall Furnace

    Product ID • ESKDVEL12NG0

  • $629.00
  • Normal Ground Shipping

Overview

Eskabe Direct DVEL 12 Vent Natural Gas Wall Direct Vent Furnaces vent through any outside wall (up to 10 inches thick).

Eskabe DVEL 12 Natural Gas Heaters use outside air for combustion and the burnt gases are vented outside. Eskabe DVEL 12 Heaters burn efficiency is approximately 80%, so you get excellent value for your fuel dollar. Each Eskabe gas wall heater INCLUDES the vent kit, so the only thing you need to do is cut a round hole through the wall, install the vent kit, and hook up a gas line. No special insulation or fire-proofing is required for the vent kit.

Eskabe Wall Natural Gas Heater uses a dual-wall pipe that exhausts the hot gases through the center pipe while bringing in cooler outside air through the outside pipe. 

Please Note: With the standard injector, Eskabe DVEL 12 Heaters can be used up to 2,000 feet altitude. Optional injectors are available for:

2,001 to 4,500 feet 4,501 to 8,500 feet 8,501 to 10,000 feet  

Return Policy | Shipping Policy

Manuals & Docs

Technical Specs

Eskabe Heater Natural Gas DVEL 12 Techs and Specs

  • Power input (Btu/h)
    11,000
  • Power output (Btu/h)
    8,800
  • Thermostat
    Yes
  • Fuel
    Natural Gas (NG)
  • Weight
    35.3 lbs
  • Cabinet Height
    20 inches
  • Cabinet Width
    17 3/8 inches
  • Cabinet Depth
    5 13/16 inches
  • Flue Vent Opening Required
    6 inches
  • Direct Vent Gas Heater
    Yes
  • Minimun Wall Thicknes
    4 1/2 inches
  • Maximun Wall Thicknes
    10 inches
  • Manufacturer Warranty
    1 Year and 10 Years on Burner

Eskabe Gas Heater DVEL 12 Natural Gas Features

  • Does not require electricity
  • The controls are conveniently located on the top. Included is a push-button piezo igniter to light the pilot
  • On the DVEL 12 - 11k btu model, the control knob allows you to select Off, Low or High heat settings and the heater will stay in that mode until you change it

Info & Links